APB Datasheet, PDF (1/4 Pages) C&K Components – Backlit Pushbutton Switch

APB Series
Backlit Pushbutton Switch
Features/Benefits
Typical Applications
• IP67 sealed
• Harsh environments
A
• 1,000,000 life cycle
• Off-Road
• Illumination
• Industrial
• Threaded or snap-in mounting • Medical
• RoHS compliant
• Transportation
• Joystick control modules
• Gaming
• Military
Specifications
Materials
FUNCTION: SPST Momentary
CONTACT ARRANGEMENT: N.O.
MOUNTING TYPE:
Snap-in (no panel seal)
Threaded body (hex nut, lock washer, and panel seal gasket provided)
Torque spec for threaded body: Do not exceed 8-9 in-lbs (0.9-1.0 N.m)
HOUSING: PBT
BASE: PBT
CAP: Painted polycarbonate
ACTUATOR:
Illuminated: Clear polycarbonate
INTERNAL SEAL: Silicone rubber
Mechanical
OPERATING LIFE: 1,000,000 cycles
TOTAL TRAVEL: 2.1 ± 0.2 mm
OPERATING POINT 1.55 ± 0.25 mm
TERMINALS: Copper alloy, gold over silver plating
MOVABLE CONTACT: Copper alloy, gold over silver plating
TERMINAL SEAL: Epoxy
WIRE LEADS: UL1569 Black 22 AWG
OVER TRAVEL: 0.6 min.
OPERATING FORCE: 4N ± 1N standard configuration; other force
option 2N ± 0.5N
VIBRATION: 10-500 Hz 10g Max
Operating Environment
OPERATING TEMPERATURE: -40˚C to 85˚C
ESD PROTECTION: 20 KV min.
SHOCK: 60g 11ms sawtooth wave
Electrical
CONTACT RATING:
200mA @ 24 V DC resistive (500,000 cycles)
100mA @ 50 V DC resistive (500,000 cycles)
400mA @ 32 V AC resistive (500,000 cycles)
125mA @ 125 V AC resistive (1,000,000 cycles)
DIELECTRIC STRENGTH: 1000 V AC min.
INSULATION RESISTANCE: 1 G Ω @ 500 VDC
INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads)
BOUNCE TIME: <5 ms
Process Environment
SEALING: IP67 for threaded body
IP65 for snap-in version (no panel seal)
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, please contact Customer Service.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box.
Designation
APB APB Series
Operating Force
2
2 Newtons
4
4 Newtons
APB
E
Cap
E
Extended Dome (600E)
Illumination
01 Super White
07 Super Blue
Bushing Style
S
Snap-in plastic
T
Threaded plastic
B
E
Cap Symbol
000 Painted black over
white without symbol*
001 Plus
002
Terminal Seal ₀₀₃
E
Epoxy ₀₀₄
Locked
Engine stop
Park brake release
005 Engine start
Contact Material
B
Gold
006 Fast
007 Slow
008 Unlocked
009 Rock shaft lower
Termination
010 Minus
Z
Solder Lug
* cap painted black over white to
W
12” Wire Leads 22 AWG _{allow customer laser etching}
12 Oct 16
A-157
Dimensions are shown: mm (inches)
Specifications and dimensions subject to change
www.ck-components.com