1000 Datasheet, PDF (1/6 Pages) C&D Technologies – Pulse Transformers

Features/Benefits
• Variety of actuators and terminations
• Panel mount tabs available
• Epoxy terminal seal—compatible with
bottom-wash cleaning
• RoHS compliant
1000 Series
Miniature Slide Switches
Typical Applications
• Test & measurement equipment
• Telecommunications
• Computer & peripherals
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @
CASE: diallyl phthalate (DAP), (UL 94V-0).
I
20 V AC or DC max. Q contact material: 6 AMPS @
ACTUATOR: Nylon, black, standard.
120 V AC or 28 V DC, 3 AMPS @ 250 V AC.
See page J-15 for additional ratings.
HOUSING: Stainless steel.
ELECTRICAL LIFE: 100,000 make-and-break cycles at full
SWITCH SUPPORT: Brass or steel, matte-tin plated.
load on models with B, K or P contact material; 40,000 cycles ^{END CONTACTS: B contact material: Copper alloy, with gold plate over}
on models with G, Q, L, M, S or R contact material.
nickel plate. Q contact material: Coin silver, silver plated. See
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
page I-16 for additional contact materials.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
CENTER CONTACT & ALL TERMINALS: B contact material: Copper
INSULATION RESISTANCE: 109 Ω min.
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page I-16 for additional contact materials.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical
OPERATING TEMPERATURE: –30ºC to 65ºC
Data chapter
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I–12 through I–16. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
1101 SP On-None-On
1103 SP On-Off-On
1108 SP Mom-None-On
1201 DP On-None-On
1203 DP On-Off-On
Mounting Style
M2 PC mount without tabs
M1 Panel mount with tabs
Actuator
S3 .200" high
S1 .040" high
S2 .140" high
S4 .285" high
S5 .370" high
S6 .485" high
T3 .200" high
Terminations
A Right angle, PC thru-hole
C PC Thru-hole
AV2 Vertical right angle, PC thru-hole
Z Solder lug
V3 V-bracket
V4 V-bracket
W .750" long, wire wrap
Z3 Quick connect
Contact Material
B Gold
Q Silver
G Gold over silver
P Gold, matte-tin
S Silver, matte-tin
R Gold over silver, matte-tin
Seal
E Epoxy
D No epoxy seal
I Epoxy potted base
Actuator Color
2 Black
1 White
3 Red
I–11
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com