CLL600-0101A1-40AM1A2 Datasheet, PDF (12/13 Pages) CITIZEN ELECTRONICS CO., LTD. – These specifications are applied to the chip type LED lamp

DATA SHEET
10. Designing precautions
12/13
1. The current limiting resistor should be placed in the circuit so that is driven within its
rating. Also avoid reverse voltage (over-current) applied instantaneously when ON or OFF.
2. When pulse driving current is applied, average current consumption should be within the
rating. Also avoid reverse voltage applied when put off.
3. Recommended soldering pattern
< For reflow soldering >
Unit : mm
Mountability and solderability need to be optimized with actual conditions
such as amount of solder, reflow temperature applied in the process.
4. When assembling the circuit board into the finished products, care must be taken to avoid
the component parts from touching other parts.
5. When using multiple LEDs, it is required to connect a current limiting resistor on
each path which the current flows to the LEDs.
(ex-1)
(ex-2)
(ex-3)
R
R
R
R
R
R
R
6. Other
This product complies with RoHS directives.
Symbol
CITILED
Name CLL600-0101A1-40AM1A2
CITIZEN ELECTRONICS CO.,LTD. JAPAN