CLL130-0102A5-65CM1B3 Datasheet, PDF (11/14 Pages) CITIZEN ELECTRONICS CO., LTD. – These specifications are applied to the chip type LED lamp

DATA SHEET
10/13
9. Precautions
9-1. Soldering
(1) Lead free soldering
　1) Following soldering paste is recommended
Melting temperature : 216 ~ 220C.
Composition : Sn 3.5Ag 0.75Cu
　2) The temperature profile at the top surface of the parts is recommended as shown
below.
　3) It is requested that products should be handled after their temperature has dropped
down to the normal room temperature
4°C/sec. Max
4°C/sec. Max
160 ~ 180°C
260°C Max
3sec. Max
220°C
140sec
60 ~ 70sec
Time
9-2. Washing
(1) When washing after soldering is needed, following conditions are requested.
　a) Washing solvent: Pure Water
　b) Temperature, time: 50C or less × 30 seconds max.
Symbol
CITILED
Name
CLL130-0102A5-65CM1B3
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2051 05/12