JCS1R Datasheet, PDF (1/3 Pages) CIT Relay & Switch – CIT SWITCH

JC
SPECIFICATIONS
Electrical Ratings
Electrical Life
Contact Resistance
Actuation Force
Actuator Travel
Dielectric Strength
Insulation Resistance
Operating Temperature
Storage Temperature
500mA @ 24VDC
10,000 cycles typical
< 50 mΩ initial
200 +/- 50gF
2.2 +/- .1mm
1000Vrms min
> 1000MΩ min
-40°C to 85°C
-40°C to 85°C
MATERIALS ←RoHS COMPLIANT
Actuator Cap
Poly Carbonate (PC)
Actuator Body
Poly Carbonate (PC)
Housing
Polyamide (PA), UL94V-0
Terminal Base
Polyamide (PA), UL94V-0
Contacts
Brass Rivet, Ag or Au plated
Terminals
Brass, Ag or Au plated
ORDERING INFORMATION
1. Series:
JC
V
1
R
G
Q
BJ
JC
2. Actuator Options:
S = Square
H = Extended Square
R = Rectangle
V = Square (concave)
Q = Square (concave)
PS = Square (panel mount)
PH = Square (extended square, panel mount)
3. Number of Poles:
1 = SPDT
2 = DPDT
4. Latching Option:
Blank = Momentary
L = Latching **Not available with R actuator
5. LED (1):
R = Red Y = Yellow W = White
G = Green B = Blue
6. LED (2): **Each switch requires two LED choices. Both LEDs may be the same color.
R = Red Y = Yellow W = White
G = Green B = Blue
7. Contact Material:
Q = Silver
R = Gold
8. Laser Etching Colors:
**Laser etching styles are only available with the V actuators. A colored film is applied
Blank = No Laser Etching Color ^{to the actuator and is laser etched to allow the LED to shine through the pattern.}
MS =Misty Silver
B = Black
9. Laser Etching Styles:
Blank = No Laser Etching Style
A DGJ
B EHK
C FIL
page 11
www.citswitch.com
phone – 763.535.2339 fax – 763.535.2194