ANP11F4B Datasheet, PDF (1/7 Pages) CIT Relay & Switch – CIT SWITCH

ANP
SPECIFICATIONS
Electrical Ratings
Electrical Life
Contact Resistance
Dielectric Strength
Actuator Travel
Insulation Resistance
Operating Temperature
Storage Temperature
3A @ 120 VAC, 28VDC; 1A @ 250VAC
50,000 cycles typical
< 20 mΩ max initial @ 2-4VDC, 100mA
1500Vrms min
.85mm +/- .2mm
> 100MΩ min
-40°C to 85°C
-40°C to 85°C
MATERIALS ←RoHS COMPLIANT
Actuator
6/6 Nylon, Glass Filled
Housing
DAP – Diallyl Phthalate
Cover
Stainless Steel
Bushing
Brass, Nickel Plated
Contacts
Brass, Silver Plated
Terminals
Brass, Silver Plated
ORDERING INFORMATION
Series:
ANP
2
1
F4
ANP
Number of Poles:
1 = SPDT
2 = DPDT
Switch Function:
1 = ON - (ON)
2 = ON – ON (Latching)
Bushing:
F4 / N4 = ¼-40NS / Non-Threaded, Keyway, 6.35mm
F9 / N9 = ¼-40NS / Non-Threaded, Flat, 6.35mm
**No bushing is selected if a panel mount frame is selected below
Terminals:
B = Solder Lug
C = PC Pin
D = Quick Connect
H = Horizontal Mount, Right Angle PC Pin; HS = Snap-in
V = Vertical Mount, Right Angle PC Pin
S20 = PC Pin with Support Bracket; V20 = Snap-in Support Bracket
S25 = PC Pin with Support Bracket; V25 = Snap-in Support Bracket
S40 = PC Pin with Support Bracket; V40 = Snap-in Support Bracket
Contacts:
Q = Silver Plated
R = Gold Plated
G = Gold over Silver Plated
Epoxy Seal:
E = Epoxy Seal
Actuator Cap / Frame:
Blank = None
C73
F75 = Snap-in Panel Mount w/ Frame
C74
F76 = Snap-in Panel Mount w/ Frame
C75
L75 = Snap-in Panel Mount w/ Frame and LED
C76
L76 = Snap-in Panel Mount w/ Frame and LED
C77
- E222871
C
Q
E
C742
Actuator Cap / Frame Colors:
** See Cap Options for color availability
page 171
www.citswitch.com
phone – 763.535.2339 fax – 763.535.2194