CDB5366 Datasheet, PDF (6/24 Pages) Cirrus Logic – Evaluation Board for CS5366

CDB5366
3.3 FlexGUI Hi-Level View
The Cirrus Logic FlexGUI defaults to the Hi-Level View as shown in Figure 1. This view provides functionally
grouped control over the CS5366, reducing the need to memorize the exact location of bit settings. Any reg-
ister may be modified at any time; however, the effect of changes made to the CS5366 is gated off until the
Control Port Bit is enabled.
When switching to TDM mode, the CS8406 Clock and Date source (Board Control Panel) must be changed
prior to changing the CS5366 SAI format. This sequential ordering resets the FPGA to assure that it timed
properly with the CS5366 TDM packet stream.
Figure 1. Hi-Level FlexGUI View
6
DS626DB1