CDB5464U Datasheet, PDF (19/38 Pages) Cirrus Logic – CDB5464U Engineering Borad and GUI Software

CDB5464U
2.8 Data Collection Window
The Data Collection Window (Figure 12) allows the user to collect sample sets of data from the CS5464
and analyze them using time domain, FFT, and histogram plots. The Data collection Window can be ac-
cessed by pulling down the Menu menu, and selecting the Data Collection Window item, or by pressing
<F6>.
Figure 12. Data Collection Window
2.8.1 Time Domain / FFT/ Histogram Selector
This menu selects the type of data processing to perform on the collected data and display in the plot area.
Refer to the Analyzing Data section for more information.
2.8.2 Config Button
This button will bring up the Configuration window, in which the user can modify the data collection spec-
ifications. Refer to the Configuration Window section in this document for more information.
2.8.3 Collect Button
This button will collect data from the part, to be analyzed in the plot area. See the Collecting Data Sets
section for more information.
DS847DB1
19