|
CDB5521 Datasheet, PDF (18/28 Pages) Cirrus Logic – Evaluation Board and Software | |||
|
◁ |
CDB5521/22/23/24/28
⢠Config
See description in Section 2.6, Histogram Win-
dow Overview.
⢠FREQUENCY
Displays the x-axis value of the cursor on the
FFT display.
⢠MAGNITUDE
Displays the y-axis value of the cursor on the
FFT display.
⢠Output
See description in Section 2.6, Histogram Win-
dow Overview.
⢠S/D
Indicator for the Signal-to-Distortion Ratio, 4
harmonics are used in the calculations (deci-
bels).
⢠S/N+D
Indicator for the Signal-to-Noise + Distortion
Ratio (decibels).
⢠SNR
Indicator for the Signal-to-Noise Ratio, first 4
harmonics are not included (decibels).
⢠S/PN
Indicator for the Signal-to-Peak Noise Ratio
(decibels).
⢠ZOOM
See description in Section 2.6, Histogram Win-
dow Overview.
⢠# of AVG
Displays the number of FFTâs averaged in the
current display.
2.8 Time Domain Window Overview
The following controls and indicators are associat-
ed with the Time Domain Analysis (Figure 10).
⢠CANCEL
See description in Section 2.6, Histogram Win-
dow Overview.
⢠Channel
See description in Section 2.6, Histogram Win-
dow Overview.
⢠COLLECT
See description in Section 2.6, Histogram Win-
dow Overview.
⢠Config
See description in Section 2.6, Histogram Win-
dow Overview.
⢠COUNT
Displays current x-position of the cursor on the
time domain display.
⢠MAGNITUDE
Displays current y-position of the cursor on the
time domain display.
⢠MAXIMUM
Indicator for the maximum value of the collect-
ed data set.
⢠MINIMUM
Indicator for the minimum value of the collect-
ed data set.
⢠Output
See description in Section 2.6, Histogram Win-
dow Overview.
⢠ZOOM
See description in Section 2.6, Histogram Win-
dow Overview.
18
DS317DB2
|
▷ |