CS4340A Datasheet, PDF (1/20 Pages) Cirrus Logic – 24-Bit, 192 kHz Stereo DAC for Audio

CS4340A
24-Bit, 192 kHz Stereo DAC for Audio
Features
101 dB Dynamic Range
-91 dB THD+N
+3.3 V or +5 V Power Supply
50 mW with 3.3 V supply
Low Clock Jitter Sensitivity
Filtered Line Level Outputs
On-Chip Digital De-emphasis for 44.1kHz
Popguard^® Technology for Control of Clicks
and Pops
Up to 200 kHz Sample Rates
Automatic Mode Detection for Sample Rates
between 4 and 200 kHz
Pin Compatible with the CS4340
Description
The CS4340A is a complete stereo digital-to-analog sys-
tem including digital interpolation, fourth-order delta-
sigma digital-to-analog conversion, digital de-emphasis
and switched capacitor analog filtering. The advantages
of this architecture include: ideal differential linearity, no
distortion mechanisms due to resistor matching errors,
no linearity drift over time and temperature, and a high
tolerance to clock jitter.
The CS4340A accepts data at all standard audio sample
rates up to 192 kHz, consumes very little power, oper-
ates over a wide power supply range and is pin
compatible with the CS4340, as described in section 3.1.
These features are ideal for DVD audio players.
ORDERING INFORMATION
CS4340A-KS
16-pin SOIC, -10 to 70 °C
CDB4340A
Evaluation Board
RST
LRCK
SDIN
SCLK
Serial
Audio
Interface
DEM
MUTEC
De-emphasis
Interpolation
Filter
External
Mute Control
∆Σ DAC
Analog Filter
Interpolation
Filter
∆Σ DAC
Analog Filter
AOUTL
AOUTR
DIF0 DIF1
MCLK
Preliminary Product Information
This document contains information for a new product.
Cirrus Logic reserves the right to modify this product without notice.
http://www.cirrus.com
© Copyright Cirrus Logic, Inc. 2002
(All Rights Reserved)
OCT ‘02
DS590PP2
1