CS3001 Datasheet, PDF (1/16 Pages) Cirrus Logic – PRECISION LOW VOLTAGE AMPLIFIER; DC TO 2KHZ

CS3001
CS3002
Precision Low Voltage Amplifier; DC to 2 kHz
Features
Low Offset: 10 µV Max
Low Drift: 0.05 µV/°C Max
Low Noise
– 6 nV/√Hz @ 0.5 Hz
– 0.1 to 10 Hz = 125 nVp-p
– 1/f corner @ 0.08 Hz
Open-Loop Voltage Gain
– 1000 Trillion Typ
– 10 Billion Min
Rail-to-Rail Output Swing
1.8 mA Supply Current
Slew rate: 5 V/µs
Applications
Thermocouple/Thermopile Amplifiers
Load Cell and Bridge Transducer Amplifiers
Precision Instrumentation
Battery-Powered Systems
Description
The CS3001 single amplifier and the CS3002 dual am-
plifier are designed for precision amplification of low
level signals and are ideally suited to applications that
require very high closed loop gains. These amplifiers
achieve excellent offset stability, super high open loop
gain, and low noise over time and temperature. The de-
vices also exhibit excellent CMRR and PSRR. The
common mode input range includes the negative supply
rail. The amplifiers operate with any total supply voltage
from 2.7 V to 6.7 V (±1.35 V to ±3.35 V).
Pin Configurations
CS3001
CS3002
PWDN 1
-In ²
-
+In 3
+
V- 4
8 NC
Out A 1
7 V+
-In A 2
6 Output +In A 3
5 NC
V- 4
-A+
+B-
8 V+
7 Out B
6 -In B
5 +In B
8-lead SOIC
8-lead SOIC
Noise vs. Frequency (Measured)
100
10
1
0.001
0.01
0.1
1
10
Frequency (Hz)
Dexter Research
Thermopile 1M
CS3001
R2
64.9k
R1
C1
100
0.015µF
Thermopile Amplifier with a Gain of 650 V/V
Preliminary Product Information
This document contains information for a new product.
Cirrus Logic reserves the right to modify this product without notice.
Cirrus Logic, Inc.
http://www.cirrus.com
© Copyright Cirrus Logic, Inc. 2002
(All Rights Reserved)
OCT ‘02
DS490PP1
1