SA Datasheet, PDF (1/3 Pages) Taiwan Semiconductor Company, Ltd – Transient Voltage Suppressor Diodes

SA SERIES
TRANSIENT VOLTAGE SUPPRESSOR
FEATURE
Voltage Range 5.0 to 170 V
500 W Peak Power
.Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
1.0W Steady State
DO-15
.500W surge capability at10×100us waveform, Duty cycle:0.01%
.Excellent clamping capability
.Low zener impedance
.Fast response time：Typically less then 1.0ps from 0 volts to VBR
for unidirectional and 5.0ns for bidirectional
1.0(25.4)
M IN.
.140(3.6)_{D IA.}
.104(2.6)
.Typical IR less then 1μΑ above 10V
.High temperature soldering guaranteed: 260°C /10 seconds
/.375"lead length / 5lbs tension
MECHANICAL DATA
+
.300(7.6)
.230(5.8)
-
.Terminal: Plated axial leads solderable per MIL-STD 202E,
method 208C
.Case: Molded with UL-94 Class V-0 recognized Flame Retardant
Epoxy
.Polarity: color band denotes cathode except bipolar
1.0(25.4)
M IN.
.034(0.9)_{D IA.}
.028(0.7)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°C ambient temperature unless otherwise stated.
Single-phase, half-wave, 60HZ, resistive or inductive load.
For capacotive load, derate current by 20%
Type Number
SYMBOL
Value
units
Peak Power Dissipation at TA=25°C,Tp=1ms (note 1)
PPPM
Minimum 500
W
Steady State Power Dissipation .375"lead length at
PD
TL=75°C (note 2)
1.0
W
Peak Forward Surge Current 8.3ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC IFSM
60
A
method) (note 3)
Storage Temperature
TSTG
-55 to +150
°C
Operating Junction Temperature
TJ
-55 to +125
°C
Note:
1. Non-repetitive Current Pulse Per Fig.3 and Derated above Ta=25°C Per Fig.2 .
2. Mounted on Copper Pad Area of 1.6×1.6″ (40×40mm)Per Fig.5 .
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Maximum.
Devices for Bipolar Applications
1. For Bidirectional Use C or CA Suffix for Types SA5.0 thru Types SA170.
2. Electrical Characteristics Apply in Both Directions.