S1AF_16 Datasheet, PDF (1/1 Pages) Chongqing Pingwei Enterprise co.,Ltd – 1.0AMP. GLASS PASSIVATED SURFACE MOUNT RECTIFIERS

S1AF THRU S1MF
FEATURE
1.0AMP. GLASS PASSIVATED SURFACE MOUNT RECTIFIERS
SMF
.High current capability
.Low forward voltage drop
.Low power loss, high efficiency
.High temperature soldering guaranteed:
260℃/10 seconds at terminals.
.096(2.45)
.108(2.75)
.051(1.3)
.059(1.5)
.For surface mounted application
.Easy pick and place
.173(4.40)
.189(4.80)
MECHANICAL DATA
.Case: Molded plastic
.Epoxy: UL94V-0 rate flame retardant
.006(0.15)
.010(0.25)
.132(3.35)
.144(3.65)
.043(1.1)
.059(1.5)
.Lead: MIL-STD- 202E, Method 208 guaranteed
.Polarity: Color band denotes cathode end
.Packaging:12mm tape per EIA STD RS-481
.Mounting position: Any
.028(0.70)
.047(1.20)
.016(0.40)
.028(0.70)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
SYMBOL S1AF S1BF S1DF S1GF S1JF S1KF S1MF
units
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
Maximum RMS Voltage
VRMS
35
70
Maximum DC blocking Voltage
VDC
50 100
Maximum Average Forward Rectified Current
at TA =55°C
IF(AV)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC IFSM
method)
Maximum Instantaneous forward Voltage at
VF
1.0A DC
Maximum DC Reverse Current @TA =25°C
IR
at rated DC blocking voltage @TA =125°C
Typical Junction Capacitance (Note1)
CJ
Typical Thermal Resistance (Note 2)
R(JA)
Storage Temperature
TSTG
Operation Junction Temperature
TJ
Note:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
2. Measured on P.C. Board with 0.2×0.2”(5.0×5.0mm)Copper Pad Areas.
200 400 600
140 280 420
200 400 600
1.0
30.0
1.0
5.0
100.0
15
75
-55 to +150
-55 to +150
800 1000 V
560 700
V
800 1000 V
A
A
V
µA
pF
°C /W
°C
°C
- 377 -