S07ASA_16 Datasheet, PDF (1/1 Pages) Chongqing Pingwei Enterprise co.,Ltd – 1.0 AMP. SURFACE MOUNT GENERAL PURPOSE SILICON RECTIFIERS

S07A THRU S07M
FEATURES
1.0 AMP. SURFACE MOUNT GENERAL PURPOSE SILICON RECTIFIERS
SOD-123FL
·Glass passivated device
·Ideal for surface mouted applications
·Low reverse leakage
·Metallurgically bonded construction
·High temperature soldering guaranteed:
250°C /10 seconds at terminals.
1.8+/-0.1
Cathode Band
2.8+/-0.1
1.0+/-0.2
MECHANICAL DATA
1.3+/-0.15
0.05~0.3
·Case: JEDEC SOD-123FL, molded plastic over
passivated chip
0.60+/-0.25
·Terminals: Solder Plated, solderable per
MIL-STD-750, Method 2026
·Polarity: Color band denotes cathode end
·Weight: 0.006 ounces, 0.02 gram
·Mounting position: Any
3.7+/-0.2
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Marking _{S07A S07B S07D S07G S07J S07K}
SYMBOL
SA SB SD SG SJ SK
S07M
SM
units
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward rectified Current
at TA =65°C (Note 1)
VRRM
VRMS
VDC
IF(AV)
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700
V
50 100 200 400 600 800 1000 V
1.0
A
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rate load (JEDEC
IFSM
method)
25
A
Maximum Instantaneous forward Voltage at
VF
1.0A DC
1.1
V
Maximum DC Reverse Current @TA =25°C
IR
at rated DC blocking voltage @TA =125°C
Typical Junction Capacitance (Note 2)
CJ
Typical thermal resistance (Note 3)
R(JA)
Storage Temperature Range
TSTG
Operation Temperature Range
TJ
5.0
100.0
4
180
-55 to +150
-55 to +150
µA
pF
°C /W
°C
°C
Note:
1.Averaged over any 20 ms period.
2.Measured at 1MHz and applied reverse voltage of 4.0Vd.c.
3.Measured on P.C. Board with 0.2×0.2″(5.0×5.0mm) Copper Pad Areas
- 379 -