RS07A_16 Datasheet, PDF (1/1 Pages) Chongqing Pingwei Enterprise co.,Ltd – 1.0AMP. SURFACE MOUNT FAST RECOVERY SURFACE MOUNT RECTIFIERS

RS07A THRU RS07M
1.0AMP. SURFACE MOUNT FAST RECOVERY SURFACE MOUNT RECTIFIERS
FEATURE
SOD-123FL
·Fast switching
·Glass passivated device
·Ideal for surface mouted applications
·Low reverse leakage
·Metallurgically bonded construction
·High temperature soldering guaranteed:
250°C /10 seconds at terminals.
MECHANICAL DATA
Cathode Band
1.8+/-0.1
1.3+/-0.15
2.8+/-0.1
1.0+/-0.2
0.05~0.3
·Case: JEDEC SOD-123FL, molded plastic over
passivated chip
·Terminals: Solder Plated, solderable per
MIL-STD-750, Method 2026
·Polarity: Color band denotes cathode end
·Weight: 0.006 ounces, 0.02 gram
·Mounting position: Any
0.60+/-0.25
3.7+/-0.2
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Marking _{RS07A RS07B RS07D RS07G RS07J RS07K SR07M}
units
SYMBOL ^{RA RB RD RG RJ RK RM}
Maximum Recurrent Peak Reverse Voltage
VRRM
50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS
35
70 140 280 420 560 700 V
Maximum DC blocking Voltage
VDC
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
at TA =65°C (Note 1)
IF(AV)
1.0
A
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC IFSM
25.0
A
method)
Maximum Instantaneous forward Voltage at
VF
1.0A DC
1.3
V
Maximum DC Reverse Current @TA =25°C
IR
at rated DC blocking voltage @TA =125°C
Maximum Reverse Recovery Time (Note 2)
trr
Typical Junction Capacitance (Note 3)
CJ
Typical Thermal Resistance (Note 3)
R(JA)
Storage Temperature
TSTG
Operation Junction Temperature
TJ
10.0
50.0
150
250
4
180
-55 to +150
-55 to +150
µA
500
ns
pF
°C/W
°C
°C
Note:
1. Averaged over any 20 ms period.
2. Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
3. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
4. Measured on P. C. Board with 0.2×0.2″(5.0×5.0mm) Copper Pad Areas.