English
Language : 

RC8005 Datasheet, PDF (1/1 Pages) Chongqing Pingwei Enterprise co.,Ltd – SINGLE-PHASE SILICON BRIDGE RECTIFIER
CHONGQING PINGYANG ELECTRONICS CO.,LTD.
RC8005 THRU RC810
SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE:50-1000V
CURRENT:8.0A
FEATURES
·Surge overload ratings-150 Amperes
·Good for printed circuit board assembly
C-1
.165(4.2)
.157(4.0)
MECHANICAL DATA
·Case: Silicon rubber passivated
·Epoxy: UL 94V-0 rate flame retardant
·Lead: MIL-STD- 202E, Method 208 guaranteed
·Polarity: As marked
·Mounting position: Any
·Weight: 1.88 grams
.086(2.20)
.078(2.0)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL RC8005 RC801 RC802 RC804 RC806 RC808 RC810 units
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
VRRM 50 100 200 400 600 800 1000 V
VRMS 35 70 140 280 420 560 700 V
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward rectified Output
Current at TA=50°C
Io
8.0
A
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rate load (JEDEC IFSM
150
A
method)
Maximum Forward Voltage Drop per element at
8.0A DC
VF
Maximum DC Reverse Current
at Rated DC Blocking Voltage
per element
I2t Rating for Fusing (t﹤8.3ms)
@ TA=25°C
IR
@ TA=100°C
I2t
1.0
V
5.0
µA
500
10
A2S
Typical Junction Capacitance (Note 1)
CJ
Typical Thermal Resistance (Note 2)
RθJA
25
pF
40
°C/W
Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts
2.Thermal Resistance from Junction to lead mounted on P.C.B with 0.47×0.47”(12×12mm) copper pads
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www1.fineprint.cn