RC201 Datasheet, PDF (1/1 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes)

CHONGQING PINGYANG ELECTRONICS CO.,LTD.
RC201 THRU RC207
SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE：50-1000V
CURRENT：2.0A
FEATURES
·Surge overload ratings-50 Amperes
·Good for printed circuit board assembly
RC-2
.395(10.0)
.355(9.0)
.290(7.4)
.270(6.9)
.220(5.6)
.180(4.6)
MECHANICAL DATA
·Case: Plastic shell with plastic encapsulation
·Epoxy: UL 94V-0 rate flame retardant
·Lead: MIL-STD- 202E, Method 208 guaranteed
·Polarity: As marked
·Mounting position: Any
·Weight: 1.88 grams
1.2
(30.5)
MIN.
1.0
25.4
MIN.
.220(5.6)
.180(4.6)
.032(0.8)
.028(0.7)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL RC201 RC202 RC203 RC204 RC205 RC206 RC207 units
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
V_RRM 50 100 200 400 600 800 1000 V
V_RMS 35 70 140 280 420 560 700 V
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward rectified Output
Current at T_A=25°C
I_o
2.0
A
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rate load (JEDEC IFSM
50
A
method)
Maximum Forward Voltage Drop per element at
1.0A DC
V_F
Maximum DC Reverse Current
at Rated DC Blocking Voltage
per element
I²t Rating for Fusing (t﹤8.3ms)
@ T_A=25°C
I_R
@ T_A=100°C
I²t
1.1
V
10
µA
500
10
A²S
Typical Junction Capacitance (Note 1)
C_J
Typical Thermal Resistance (Note 2)
R_θJA
25
pF
40
°C/W
Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts
2.Thermal Resistance from Junction to lead mounted on P.C.B with 0.47×0.47”(12×12mm) copper pads
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www^１.fineprint.cn