KBPC15005-MB1505 Datasheet, PDF (1/1 Pages) Chongqing Pingwei Enterprise co.,Ltd – SINGLE-PHASE SILICON BRIDGE RECTIFIER

CHONGQING PINGYANG ELECTRONICS CO.,LTD.
KBPC15005/MB1505 THRU KBPC1510/MB1510
SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE：50-1000V
CURRENT：15.0A
FEATURES
·Metal case for Maximum Heat Dissipation
·Surge overload ratings-300 Amperes
·Low forward voltage drop
MECHANICAL DATA
·Case: Metal shell with plastic encapsulation
·Epoxy: UL 94V-0 rate flame retardant
· Terminals: Plated .25”(6.35mm) Faston lugs,
Solderable per MIL-STD-202E, Method 208
guaranteed
·Polarity: As marked
·Mounting: Thru hole for 8# screw
·Weight: 30 grams
MB-25
.500 ^TYP.
( 1 2 .7 )
1 .1 8 1 (3 0 .0 )
1 .1 0 2 (2 8 .0 )
.6 7 3 (1 7 .1 )
.6 3 3 (1 6 .1 )
.452
( 1 1 .5 )
M
AX
.480(12.2)
.425(10.8)
HOLE FOR
NO. 8 SCREW
.732(18.6)
.692(17.6)
AC
AC
1.181(30.0)
.673(17.1) ^1.102(28.0)
.6 3 3 (1 6 . 1 )
.5 8 2 ( 1 4 .8 )
.5 4 3 ( 1 3 .8 )
.033x.250
(0.8x6.4)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%.
KBPC KBPC KBPC KBPC KBPC KBPC KBPC
SYMBOL ^{15005 1501 1502 1504 1506 1508 1510} units
MB1505 MB151 MB152 MB154 MB156 MB158 MB1510
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
V_RRM 50 100 200 400 600 800 1000 V
V_RMS 35 70 140 280 420 560 700 V
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward rectified Output
Current at T_C=55°C
I_o
15.0
A
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rate load (JEDEC IFSM
method)
300
A
Maximum Forward Voltage Drop per element at
7.5A DC
V_F
1.1
V
Maximum DC Reverse Current
at Rated DC Blocking Voltage
per element
I²t Rating for Fusing (t<8.3ms)
@ T_A=25°C
I_R
@ T_A=100°C
I²t
10
µA
500
374
A²S
Typical Junction Capacitance (Note 1)
C_J
Typical Thermal Resistance (Note 2)
R_θJA
40
pF
19
°C/W
Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts
2.Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.B.C. with 0.47×0.47”(12×12mm) copper pads
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www^１.fineprint.cn