HS3A Datasheet, PDF (1/1 Pages) Taiwan Semiconductor Company, Ltd – 3.0 AMPS. High Efficient Surface Mount Rectifiers

HS3A THRU HS3M
FEATURE
3.0AMPS. HIGH EFFICIENCY PLASTIC RECTIFIERS
SMC（DO-214AB）
.Low leakage
.Low forward voltage drop
.High current capability
.High surge capability
.High reliability
.High temperature soldering guaranteed:
260℃/10 seconds at terminals.
.For surface mounted application.
.Easy pick and place.
MECHANICAL DATA
.128(3.25)
.108(2.75)
.103(2.62)
.079(2.00)
.280(7.11)
.260(6.60)
.320(8.13)
.305(7.75)
.245(6.22)
.220(5.59)
.012(0.305)
.006(0.152)
.Terminal: Plated solderable per MIL-STD 202E, method 208C
.Case: Molded with UL-94 Class V-0 recognized
Flame Retardant Epoxy
.060(1.52) ^.008(0.203)
.030(0.76) ^.002(0.051)
.Polarity: color band denotes cathode
.Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
HS HS HS HS HS HS HS HS
SYMBOL
3A 3B 3D 3F 3G 3J 3K 3M
units
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified Current
at TA=55°C
Peak Forward Surge Current 8.3ms single half
VRRM
VRMS
VDC
IF(AV)
50 100 200 300 400 600 800 1000 V
35 70 140 210 280 420 560 700 V
50 100 200 300 400 600 800 1000 V
3.0
A
sine- wave superimposed on rated load IFSM
(JEDEC method)
90.0
A
Maximum Forward Voltage at 3.0 A DC
VF
Maximum DC Reverse Current @TA =25°C
IR
at rated DC blocking voltage @TA =125°C
Maximum Reverse Recovery Time (Note 1)
trr
1.0
1.3
1.7
V
5.0
µA
100.0
50
75
ns
Typical Junction Capacitance (Note 2)
CJ
Typical Thermal Resistance (Note 3)
R(JA)
Storage Temperature
TSTG
Operation Junction Temperature
TJ
80
50
pF
50
°C /W
-55 to +150
°C
-55 to +150
°C
Note:
1. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Measured on P.C. Board with 0.2×0.2”(5.0×5.0mm)Copper Pad Areas.
- 203 -