HS2A Datasheet, PDF (1/1 Pages) Taiwan Semiconductor Company, Ltd – 2.0 AMPS. High Efficient Surface Mount Rectifiers

HS2A THRU HS2M
2.0AMPS. HIGH EFFICIENCY PLASTIC RECTIFIERS
FEATURE
SMB（DO-214AA）
.Low leakage
.Low forward voltage drop
.217(5.50)
.193(4.9)
.High current capability
.High surge capability
.083(2.11)
.075(1.91)
.155(3.94)
.130(3.30)
.High reliability
.High temperature soldering guaranteed:
260℃/10 seconds at terminals.
.For surface mounted application.
.Easy pick and place.
.185(4.70)
.160(4.06)
.012(0.305)
.006(0.152)
MECHANICAL DATA
.103(2.60)
.078(1.98)
.Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
.Case: Molded with UL-94 Class V-0 recognized
Flame Retardant Epoxy
.Polarity: color band denotes cathode
.008(0.203)
.002(0.051)
.060((1.52)
.032(0.80)
Dimensions in inches and (millimeters)
.Mounting position: any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
SYMBOL HS2A HS2B HS2D HS2F HS2G HS2J HS2K HS2M units
Maximum Recurrent Peak Reverse Voltage
VRRM
50 100 200 300 400 600 800 1000 V
Maximum RMS Voltage
VRMS
35 70 140 210 280 420 560 700
V
Maximum DC blocking Voltage
VDC
50 100 200 300 400 600 800 1000 V
Maximum Average Forward Rectified Current
IF(AV)
2.0
A
.375"(9.5mm) lead length at TA =55°C
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC IFSM
60
A
method)
Maximum Instantaneous forward Voltage at
VF
2.0A DC
1.0
1.3
1.7
V
Maximum DC Reverse Current @TA=25°C
at rated DC blocking voltage @TA =125°C
IR
5.0
µA
100.0
Maximum Reverse Recovery Time (Note 1)
trr
50
75
ns
Typical Junction Capacitance (Note 2)
CJ
50
30
pF
Typical Thermal Resistance (Note 3)
R(JA)
75
°C /W
Storage Temperature
TSTG
-55 to +150
°C
Operation Junction Temperature
TJ
-55 to +150
°C
Note:
1. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Measured on P.C.Board with 0.2×0.2”(5.0×5.0mm)Copper Pad Areas.
- 201 -