HS1A Datasheet, PDF (1/1 Pages) Taiwan Semiconductor Company, Ltd – 1.0 AMP. High Efficient Surface Mount Rectifiers

HS1A THRU HS1M
FEATURE
1.0AMP. HIGH EFFICIENCY PLASTIC RECTIFIER
SMA（DO-214AC）
.Low leakage
.Low forward voltage drop
.High current capability
.High surge capability
.High reliability
.High temperature soldering guaranteed:
260°C /10 seconds at terminals.
.For surface mounted application.
.Easy pick and place.
MECHANICAL DATA
.Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
.Case: Molded with UL-94 Class V-0 recognized
Flame Retardant Epoxy
.Polarity: color band denotes cathode
.Mounting position: any
Fig1: SMA/DO-214AC*
FOR OPEN JUNCTION DICE PACKAGING OUTLINE
Fig2: SMA/DO-214AC
FOR GLASS PASSIVATED DICE PACKAGING OUTLINE
NO
Fig1（mm）
A
1.9～2.4
B
1.2～1.8
C
0.23MAX
D
2.4～2.9
E
3.8～4.6
F
0.8～1.8
G
4.8～5.8
Fig2（mm）
1.98～2.3
1.35～1.6
0.2MAX
2.4～2.9
3.8～4.6
0.8～1.8
4.8～5.8
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%
Type Number
SYMBOL HS1A HS1B HS1D HS1F HS1G HS1J HS1K HS1M units
Maximum Recurrent Peak Reverse Voltage
VRRM
50 100 200 300 400 600 800 1000 V
Maximum RMS Voltage
VRMS
35 70 140 210 280 420 560 700
V
Maximum DC blocking Voltage
VDC
50 100 200 300 400 600 800 1000 V
Maximum Average Forward Rectified Current
IF(AV)
1.0
A
.375"(9.5mm) lead length at TA =55°C
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC IFSM
30
A
method)
Maximum Instantaneous forward Voltage at
VF
1.0A DC
1.0
1.3
1.7
V
Maximum DC Reverse Current @TA =25°C
IR
at rated DC blocking voltage @TA =100°C
5.0
µA
100.0
Maximum Reverse Recovery Time (Note 1)
trr
50
75
ns
Typical Junction Capacitance (Note 2)
CJ
20
15
pF
Typical Thermal Resistance (Note 3)
R(JA)
75
°C/W
Storage Temperature
TSTG
-55 to +150
°C
Operation Junction Temperature
TJ
-55 to +125
°C
Note:
1. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Measured on P.C. Board with 0.2×0.2″(5.0×5.0mm)Copper Pad Areas.
- 199 -