DRAN30 Datasheet, PDF (7/8 Pages) Chinfa Electronics Ind. Co., Ltd. – AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT

DRAN30 SERIES
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25^oC Unless Otherwise Noticed
CONTROL AND PROTECTION
Characteristics
Power Rdy
(for 24V model only)
Conditions
Threshold voltage of contact closed (at start up)
min.
18.8
typ.
max.
19.6
Over voltage protection
Vi nom, Io nom
(Auto Recovery)
Output short circuit
Degree of protection
5V model
6.0
12V model
15
24V model
30
48V model
60
6.8
16.5
33
66
Fold forward
IP20
APPROVALS AND STANDARDS
UL / cUL
UL 508 Listed
UL 60950-1, UL 1310 Class 2 Power (only 5V w/o Class 2) Recognized
ISA 12.12.01(Class I, Division 2, Groups A, B, C and D)
TUV
EN 60950-1, CB scheme
EN 61558-1, EN 61558-2-17 (meet EN 60204-1)
CE
EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3
EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3
EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4
EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11
ENV 50204 Level 2, EN 61204-3
CCC
Vibration resistance
Shock resistance
GB4943, GB9254, GB17625.1
meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis )
meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face)
unit
VDC
VDC
VDC
VDC
VDC
PHYSICAL CHARACTERISTICS
Case size
Case material
Weight
Packing
90 x 40.5 x 114 mm (3.6 x 1.59 x 4.49 inches)
Plastic
270 g
0.35 kg ; 40 / 15 kg / 2.16 CUFT
MECHANISM & PIN CONFIGURATION
mm [inch]
40.50 [1.59]
54321
114.00 [4.49]
- - ++Rdy
Vout ADJ.
DC ON
NL
67 8
CONSTRUCTION
Easy snap-on mounting onto the DIN-Rail
(TS35/7.5 or TS35/15), unit sits safeIy and
firmly on the rail.
INSTALLATION
Ventilation / Cooling
Normal convection
All sides 25mm free space
For cooling recommended
Connector size range
Screw terminal:
AWG26-12 (0.2~2.5mm² ) flexible / solid cable,
connector can withstand torque at maximum 5
pound-inches.
4~5 m/m stripping at cable end recommends
Use copper conductors only, 60 / 75^oC
GENERAL TOLERANCE
0.00[0.00] - 30.00[1.18]
±0.30[0.01]
30.00[1.18] - 120.00[4.72]
±0.50[0.02]
www.chinfa.com
2011.02.14
[e-mail]
P7