DRA480-24A Datasheet, PDF (4/4 Pages) Chinfa Electronics Ind. Co., Ltd. – AC - DC DIN RAIL MOUNTABLE 480W INDUSTRIAL CONTROL EQUIPMENT

DRA480 SERIES
MECHANISM & PIN CONFIGURATION
mm [inch]
175.00 [6.89]
116.6 [4.59]
7.0 [0.3]
DRA480
Chinfa Electronics ind. Co., Ltd.
CHINFA _{ISO 9001 Certified}
115 / 230 VAC 7/3.5A 47-63Hz
24 VDC / 20A
79
6
1
175.00 [6.89]
DRA480
Chinfa Electronics ind. Co., Ltd.
CHINFA _{ISO 9001 Certified}
115 / 230 VAC 7/3.5A 47-63Hz
79
24 VDC / 20A
6
1
CONSTRUCTION
Easy snap-on mounting onto the DIN-Rail
(TS35/7.5 or TS35/15), unit sits safeIy and
firmly on the rail.
INSTALLATION
Ventilation / Cooling
Normal convection
All sides 25mm free space
For cooling recommended
Connector size range
Screw terminal:
10-24AWG flexible / solid cable,
8 m/m stripping at cable end recommends
Detachable connector:
14-24AWG flexible / solid cable,
7 m/m stripping at cable end recommends
PIN ASSIGNMENT
PIN NO.
1
2
3
4
5
6
7
8
9
Designation
RDY
V+
V+
V-
V-
N
L
DC ON
DC LO
Vout ADJ.
S/P
Description
A normal open relay contact for DC ON level control
(Only for 24V model)
Positive output terminal
Positive output terminal
Negative output terminal
Negative output terminal
Ground this terminal to minimize high-frequency emissions
Input terminals (neutral conductor, no polarity at DC input)
Input terminals (phase conductor, no polarity at DC input)
Operation indicator LED
DC LOW voltage indicator LED
Trimmer-potentiometer for Vout adjustment
Single / Parallel select switch
www.chinfa.com
2008.08.19
[e-mail]