DRA100-12A Datasheet, PDF (4/4 Pages) Chinfa Electronics Ind. Co., Ltd. – AC - DC DIN RAIL MOUNTABLE INDUSTRIAL CONTROL EQUIPMENT

DRA100 SERIES
MECHANISM & PIN CONFIGURATION
mm [inch]
CONSTRUCTION
Easy snap-on mounting onto the DIN-Rail
(TS35/7.5 or TS35/15), unit sits safely and
firmly on the rail; no tools required even to remove
6 5 4 3 21
54.00 [2.13]
INSTALLATION
Ventilation / Cooling
Normal convection
All sides 25mm free space
For cooling recommended
Connector size range
Solid:0.2-2.0mm²(AWG24-14)
(use copper conductors only)
113.5 [4.47]
Rdy
S/P
Vout ADJ.
DC LO
DC ON
DRA100
NL
789
PIN ASSIGNMENT
PIN NO.
1
2
3
4
5
6
7
8
9
Designation
RDY
Vo+
Vo+
Vo-
Vo-
N
L
Vout ADJ.
DC ON
DC Lo
S/P
Description
A normal open relay contact for DC ON level control
(Only for 24V model)
Positive output terminal
Positive output terminal
Negative output terminal
Negative output terminal
Ground this terminal to minimize high-frequency emissions
Input terminals (neutral conductor, no polarity at DC input)
Input terminals (phase conductor, no polarity at DC input)
Trimmer-potentiometer for Vout adjustment
Operation indicator LED
DC low voltage indicater LED
Single/Parallel select switch (without 24AL Model)
www.chinfa.com
2008.12.19
[e-mail]