DRS3 Datasheet, PDF (3/4 Pages) Chinfa Electronics Ind. Co., Ltd. – AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT

DRS3 SERIES
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25^oC Unless Otherwise Noticed
APPROVALS AND STANDARDS
UL / cUL
UL 508 Listed
cTUVUS
UL 60950-1
TUV
EN 60950-1
CE
EN 61000-6-3, EN 55032 Class B, EN 61000-3-2, EN 61000-3-3
EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3
EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4
EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11
ENV 50204 Level 2, EN 61204-3
Vibration resistance
meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis )
Shock resistance
meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face)
PHYSICAL CHARACTERISTICS
Case size
90 x 40.50 x 100 mm (3.54 x 1.59 x 3.94 inches)
Case material
Weight
Plastic
250 g
Packing
270 kg ; 40 / 12 kg / 2.16 CUFT
MECHANISM & PIN CONFIGURATION
mm [inch]
40.50 [1.59]
43 21
24VDC / 3A
Vout ADJ.
DC ON
100-240VAC
1.7A
47-63Hz
40.50 [1.59]
43 21
24VDC / 3A
Vout ADJ.
DC ON
100-240VAC
1.7A
47-63Hz
100 [3.94]
5 67
5 67
CONSTRUCTION
Easy snap-on mounting onto the DIN-Rail
(TS35/7.5 or TS35/15), unit sits safeIy and
firmly on the rail.
INSTALLATION
Ventilation / Cooling
Normal convection
All sides 25mm free space
For cooling recommended
Connector size range
Spring terminal:
AWG24-14 (0.2~2mm² ) flexible / solid cable,
10 m/m stripping at cable end recommends
Screw terminal:
AWG26-12 (0.2~2.5mm² ) flexible / solid cable,
connector can withstand torque at maximum 5
pound-inches.
4-5 m/m stripping at cable end recommends
Use copper conductors only, 60 / 75^oC
GENERAL TOLERANCE
0.00[0.00] - 30.00[1.18]
±0.30[0.01]
30.00[1.18] - 120.00[4.72]
±0.50[0.02]
PIN ASSIGNMENT
PIN NO.
1, 2
3, 4
5
6
7
Designation
V+
V-
N
L
Vout ADJ.
DC ON
www.chinfa.com
2016.06.21
Description
Positive output terminal
Negative output terminal
Ground this terminal to minimize high-frequency emissions
Input terminals (neutral conductor, no polarity at DC input)
Input terminals (phase conductor, no polarity at DC input)
Trimmer-potentiometer for Vout adjustment
Operation indicator LED
[e-mail]
P3