DRE240 Datasheet, PDF (3/4 Pages) Chinfa Electronics Ind. Co., Ltd. – AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT

DRE240 SERIES
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25^oC Unless Otherwise Noticed
APPROVALS AND STANDARDS
UL / cUL
UL 508 Listed
UL 60950-1 Recognized
TUV
EN 60950-1, CB scheme
CE
EN 61000-6-3, EN 55022 Class B, EN 61000-3-2 Class D, EN 61000-3-3
EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3
EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4
EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11
ENV 50204 Level 2, EN 61204-3
Vibration resistance
meet IEC 60068-2-6 (Mounting by rail : Random wave, 10-500 Hz, 2G, each along X, Y, Z axes 10 min / cycle, 60 min )
Shock resistance
meet IEC 60068-2-27 (Half sine wave, 4G, 22ms, 3 axes, 6 Faces, 3 times for each face)
PHYSICAL CHARACTERISTICS
Case size
Screw terminal type
124.5 x 64 x 123.6 mm (4.9 x 2.52 x 4.87 inches)
Detachable connector type 143.5 x 64 x 123.6 mm (5.65 x 2.52 x 4.87 inches)
Case material
Metal
Weight
860g
Packing
0.96kg ; 20 / 20.5kg / 2.01CUFT
MECHANISM & PIN CONFIGURATION
mm [inch]
64 [2.52]
6
1
S
- - ++ ^Rdy
P
Vout ADJ.
DC LO
DC ON
64 [2.52]
6
1
S _{- - ++} Rdy
P
Vout ADJ.
DC LO
DC ON
116.6 [4.59]
DRE240
NL
DRE240
NL
AC INPUT
79
79
GENERAL TOLERANCE
0.00[0.00] - 30.00[1.18]
±0.30[0.01]
30.00[1.18] - 120.00[4.72]
±0.50[0.02]
7.0 [0.3]
CONSTRUCTION
Easy snap-on mounting onto the DIN-Rail
(TS35/7.5 or TS35/15), unit sits safeIy and
firmly on the rail.
INSTALLATION
Ventilation / Cooling
Normal convection
All sides 25mm free space
For cooling recommended
Connector size range
Screw terminal:
AWG24-10 (0.2~4mm² ) flexible / solid cable,
-Input connector can withstand torque at
maximum 9 pound-inches.
-Output connector can withstand torque at
maximum 5.5 pound-inches.
8 m/m stripping at cable end recommends
Detachable connector:
AWG24-12 (0.2~2.5mm² ) flexible / solid cable,
-Input connector can withstand torque at
maximum 4.5 pound-inches.
-Output connector can withstand torque at
maximum 7 pound-inches.
4~5 m/m stripping at cable end recommends
Use copper conductors only, 60 / 75^oC
PIN ASSIGNMENT
PIN NO.
1
2
3, 4
5, 6
7
8
9
Designation
RDY
V+
V-
N
L
DC ON
DC LO
Vout ADJ.
S/P
Description
A normal open relay contact for DC ON level control
(Never connect except 24V model)
Positive output terminal
Negative output terminal
Ground this terminal to minimize high-frequency emissions
Input terminals (neutral conductor, no polarity at DC input)
Input terminals (phase conductor, no polarity at DC input)
Operation indicator LED
DC LOW voltage indicator LED
Trimmer-potentiometer for Vout adjustment
Single / Parallel select switch
www.chinfa.com
2011.02.16
[e-mail]
P3