DRD30 Datasheet, PDF (3/4 Pages) Chinfa Electronics Ind. Co., Ltd. – AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT

DRD30 SERIES
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25^oC Unless Otherwise Noticed
APPROVALS AND STANDARDS
UL / cUL
UL 508
CTUVUS
UL 60950-1
TUV
EN 60950-1
CE
EN 61000-6-3, EN 55022 Class B
EN 61000-6-2, EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4
EN 61000-4-5, EN 61000-4-6, EN61000-4-8, ENV 50204, EN 61204-3
Vibration resistance
meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis )
Shock resistance
meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face)
PHYSICAL CHARACTERISTICS
Case size
91 x 35 x 56.5 mm (3.58 x 1.38 x 2.22 inches)
Case material
Plastic
Weight
120g
Packing
0.16kg ; 88 / 14kg / 1.82CUFT
MECHANISM & PIN CONFIGURATION
mm [inch]
Vo
Vi
CONSTRUCTION
Easy snap-on mounting onto the DIN-Rail
(TS35/7.5 or TS35/15), unit sits safely and
firmly on the rail; no tools required even to remove
INSTALLATION
Ventilation / Cooling
Normal convection
All sides 25m/m free space
For cooling recommended
Connector size range
AWG24-12 (0.2~2.5mm²) flexible / solid cable
-Connector can withstand torque at maximum
6 pound-inches.
7 m/m stripping at cable end recommends.
Use copper conductors only, 60/75 ^oC
GENERAL TOLERANCE
0.00[0.00] - 30.00[1.18]
±0.30[0.01]
30.00[1.18] - 120.00[4.72]
±0.50[0.02]
PIN ASSIGNMENT
PIN NO. Designation Description
1, 2
-
Negative output terminal
3, 4
+
Positive output terminal
5
ON / OFF Remote ON / OFF terminal
6
+
Positive input terminal
7
-
Negative input terminal
Vout ADJ. Trimmer-potentiometer for Vout adjustment
DC ON
Operation indicator LED
DC LO
DC Low indicator LED
www.chinfa.com
2016.04.18
[e-mail]
P3