DRA480_10 Datasheet, PDF (3/4 Pages) Chinfa Electronics Ind. Co., Ltd. – AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT

DRA480 SERIES
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25^oC Unless Otherwise Noticed
APPROVALS AND STANDARDS
UL / cUL
UL 508 Listed
UL 60950-1 Recognized
ISA 12.12.01(Class I, Division 2, Groups A, B, C and D)
TUV
EN 60950-1, CB scheme
EN 61558-1, EN 61558-2-17 (meet EN 60204-1)
CE
EN 61000-6-3, EN 55022 Class B, EN 61000-3-2 Class D, EN 61000-3-3
EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3
EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4
EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11
ENV 50204 Level 2, EN 61204-3
CCC
Vibration resistance
Shock resistance
GB4943, GB9254, GB17625.1
meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis )
meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face)
PHYSICAL CHARACTERISTICS
Case size
Screw terminal type
124.5 x 175.5 x 123.6 mm (4.9 x 6.91 x 4.87 inches)
Detachable connector type 143.5 x 175.5 x 123.6 mm (5.65 x 6.91 x 4.87 inches)
Case material
Metal
Weight
1920g
Packing
2.3kg ; 8 / 20kg / 2.35CUFT
MECHANISM & PIN CONFIGURATION
mm [inch]
17 5.50 [6. 91 ]
17 5.50 [6. 91 ]
DRA480
Chinfa Electronics ind. Co., Ltd.
CHINFA _{ISO 9001 Certified}
DRA480
Chinfa Electronics ind. Co., Ltd.
CHINFA _{ISO 9001 Certified}
115 / 230 VAC 7/3.5A 47-63Hz
24 VDC / 20A
115 / 230 VAC 7/3.5A 47-63Hz
24 VDC / 20A
97
6
1
97
6
1
116.6 0 [4 .5 9] 7.0 0 [0 .3 0]
GENERAL TOLERANCE
0.00[0.00] - 30.00[1.18]
±0.30[0.01]
30.00[1.18] - 120.00[4.72]
±0.50[0.02]
120.00[4.72] - 400.00[15.75]
±0.80[0.03]
PIN ASSIGNMENT
CONSTRUCTION
Easy snap-on mounting onto the DIN-Rail
(TS35/7.5 or TS35/15), unit sits safeIy and
firmly on the rail.
INSTALLATION
Ventilation / Cooling
Normal convection
All sides 25mm free space
For cooling recommended
Connector size range
Screw terminal:
AWG24-10 (0.2~4mm² ) flexible / solid cable,
-Input connector can withstand torque at
maximum 9 pound-inches.
-Output connector can withstand torque at
maximum 5.5 pound-inches.
8 m/m stripping at cable end recommends
Detachable connector:
AWG24-12 (0.2~2.5mm² ) flexible / solid cable,
-Input connector can withstand torque at
maximum 4.5 pound-inches.
-Output connector can withstand torque at
maximum 7 pound-inches.
4~5 m/m stripping at cable end recommends
Use copper conductors only, 60 / 75^oC
PIN NO.
1, 2
3, 4
5
6
7
8
9
Designation
V-
V+
RDY
L
N
DC ON
DC LO
Vout ADJ.
S/P
Description
Negative output terminal
Positive output terminal
A normal open relay contact for DC ON level control
(Never connect except 24V model)
Input terminals (phase conductor, no polarity at DC input)
Input terminals (neutral conductor, no polarity at DC input)
Ground this terminal to minimize high-frequency emissions
Operation indicator LED
DC LOW voltage indicator LED
Trimmer-potentiometer for Vout adjustment
Single / Parallel select switch
www.chinfa.com
2010.05.21
[e-mail]
P3