DRA300_10 Datasheet, PDF (3/4 Pages) Chinfa Electronics Ind. Co., Ltd. – AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT

DRA300 SERIES
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25^oC Unless Otherwise Noticed
APPROVALS AND STANDARDS
UL / cUL
UL 508 Listed
UL 60950-1 Recognized
ISA 12.12.01(Class I, Division 2, Groups A, B, C and D)
TUV
EN 60950-1, CB scheme
EN 61558-1, EN 61558-2-17 (meet EN 60204-1)
CE
EN 61000-6-3, EN 55022 Class B, EN 61000-3-2 Class D, EN 61000-3-3
EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3
EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4
EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11
ENV 50204 Level 2, EN 61204-3
Vibration resistance
meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis )
Shock resistance
meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face)
PHYSICAL CHARACTERISTICS
Case size
Screw terminal type
124.5 x 83.5 x 123.6 mm (4.9 x 3.29 x 4.87 inches)
Detachable connector type 143.5 x 83.5 x 123.6 mm (5.65 x 3.29 x 4.87 inches)
Case material
Metal
Weight
1400g
Packing
1.53kg ; 16 / 25.5kg / 2.01CUFT
MECHANISM & PIN CONFIGURATION
mm [inch]
83.5 0 [3 .2 9]
6
1
83.5 0 [3 .2 9]
6
1
116.6 0 [4 .5 9]
S
P - - ++ ^Rdy
Vout ADJ.
DC LO
DC ON
S - - ++ Rdy
P
Vout ADJ.
DC LO
DC ON
DRA300
LN
DRA300
LN
AC INPUT
79
79
GENERAL TOLERANCE
0.00[0.00] - 30.00[1.18]
±0.30[0.01]
30.00[1.18] - 120.00[4.72]
±0.50[0.02]
120.00[4.72] - 400.00[15.75]
±0.80[0.03]
PIN ASSIGNMENT
CONSTRUCTION
Easy snap-on mounting onto the DIN-Rail
7.00 [0.30] _{(TS35/7.5 or TS35/15), unit sits safeIy and}
firmly on the rail.
INSTALLATION
Ventilation / Cooling
Normal convection
All sides 25mm free space
For cooling recommended
Connector size range
Screw terminal:
AWG24-10 (0.2~4mm² ) flexible / solid cable,
-Input connector can withstand torque at
maximum 9 pound-inches.
-Output connector can withstand torque at
maximum 5.5 pound-inches.
8 m/m stripping at cable end recommends
Detachable connector:
AWG24-12 (0.2~2.5mm² ) flexible / solid cable,
-Input connector can withstand torque at
maximum 4.5 pound-inches.
-Output connector can withstand torque at
maximum 7 pound-inches.
4~5 m/m stripping at cable end recommends
Use copper conductors only, 60 / 75^oC
PIN NO.
1
2
3, 4
5, 6
7
8
9
www.chinfa.com
2010.05.21
Designation
RDY
V+
V-
L
N
DC ON
DC LO
Vout ADJ.
S/P
Description
A normal open relay contact for DC ON level control
(Never connect except 24V model)
Positive output terminal
Negative output terminal
Ground this terminal to minimize high-frequency emissions
Input terminals (phase conductor, no polarity at DC input)
Input terminals (neutral conductor, no polarity at DC input)
Operation indicator LED
DC LOW voltage indicator LED
Trimmer-potentiometer for Vout adjustment
Single / Parallel select switch
[e-mail]
P3