ARL2501 Datasheet, PDF (1/2 Pages) Shanghai Lunsure Electronic Tech – HIGH VOLTAGE BUTTON DIODES FOR AUTOMOTIVE

Shanghai Lunsure Electronic
Technology Co.,LTD
Tel:[phone]
Fax:[phone]
ARL2501/ARSL2501
THRU
ARL2512/ARSL2512
Features
Low leakage
Low forward voltage drop
High current capability
High forward surge current capability
.185(4.7)
Mechanical Data
.165(4.2)
Case: transfer molded plastic
Technology: button with vcauum soldered
Epoxy: UL94V-0 rate flame retardant
Polarity: color ring denotes cathode
Max28.0mm
Lead: Plated lead, solderable per MIL-STD-202E method 208C ^Min25.4mm
Mounting position: Any
Weigth: ARL 2.70 grams, ARSL 2.60 grams
HIGH VOLTAGE BUTTON
DIODES FOR AUTOMOTIVE
VOLTAGE RANGE
100 TO 1200 VOLTS
CURRENT 25AMPS
.051(1.3) ^AR
DIA
.047(1.2)
.185(4.7)
.165(4.2)
.051(1.3) ^ARSL
DIA
.047(1.2)
.250(6.4)
.235(6.0)
.250(6.4)
.235(6.0)
Max28.0mm
Min25.4mm
.410(10.4) _DIA
.380( 9.7)
.346(8.8) _DI
.327(8.2)
Maximum Ratings and Electrical Charactristics
.225(5.7) _DIA
.215(5.5)
.225(5.7) _DIA
.215(5.5)
Rating at 25^oC ambient temperature unless otherwise specified
Dimensions in inches and millimeters
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load derate current by 20%
Parameters
Symbols
ARL2501
ARSL2501
ARL2502
ARSL2502
ARL2504
ARSL2504
ARL2506
ARSL2506
ARL2508
ARSL2508
ARL2510
ARSL2510
ARL2512
ARSL2512
Units
Maximum repetitive peak reverse voltage V_RRM 100
200
400
600
800 1000 1200 Volts
Maximum RM S voltage
V_RMS
70
140
280
420
560
700
840 Volts
Maximum DC blocking voltage
V_DC
100
200
400
600
800 1000 1200 Volts
Maximum Average rectified forward current
at T_C=110^oC
I_o
25
Amps
Peak forward surge current 8.3mS single
half sine-wave superimposed on rated load I_FSM
300
Amps
(JE DEC Method)
Rating for fusing(t<8.3ms)
I²t
Maximum instantaneous forward voltage
drop at 35A
V_F
Maximum DC reverse current T_A=25^oC
at rated DC blocking voltage T_A=150^oC
I_R
Typical thermal resistance
R_θJC
374
A²S
1.0
Volts
5.0
uA
500
1.0
o_C/W
Operating and storage temperature
T_J,T_STG
-65 to +175
o_C
Notes: 1.Enough heatsink must be considered in application.
www. cnelectr .com