1N4933G Datasheet, PDF (1/2 Pages) Rectron Semiconductor – FAST RECOVERY GLASS PASSIVATED RECTIFIER

CE
CHENYI ELECTRONICS
1N4933G THRU 1N4937G
FAST RECOVERY GLASS PASSIVATED RECTIFIER
Reverse Voltage - 50 to 600 Volts
Forward Current - 1.0Ampere
FEATURES
. Fat switching
. Low leakage current
. Low forward voltage drop
. High current capability
. Glass passivated junction
. High reliability capability
MECHANICAL DATA
. Case: JEDEC DO-41 molded plastic body
. Terminals: Plated axial lead, solderable per MIL-STD-750,method 2026
. Polarity: Color band denotes cathode end
. Mounting Position: Any
. Weight: 0.012 ounce, 0.34 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive)
load. For capacitive load,derate current by 20%)
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Macimum average forward rectified
current 0.375"(9.5mm)lead length at TA=75
Peak forward surge current 8.3ms
sing-wave superimposed on rated load
(JEDEC method)TA=75
Maximum instantaneous forward voltage at 1.0 A
Maximum DC Rreverse Current at rated DC
blocking voltage
Maximum full load reverse current full cycle
average. 0.375"(9.5mm)lead length at
TL=55
Maximum reverse recovery time(Note 1)
Typical junction Capacitance(Note 2)
Operating and storage temperature range
Symbols 1N4933G 1N4934G 1N4935G 1N4936G 1N4937G
VRRM
50
100
200
400
600
VRMS
35
70
140
280
420
VDC
50
100
200
400
600
Units
Volts
Volts
Volts
I(AV)
1.0
Amp
IFSM
VF
IR
Trr
CJ
TJ TSTG
30.0
1.2
5.0
100
150
250
15.0
-65 to +175
Amps
Volts
A
500
ns
pF
Notes: 1.Test conditions:IF=1.0A,V_R=30V
2.Measured at 1MHz and applied reverse voltage of 4.0V Volts.
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 1 of 2