UF2001PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – HIGH EFFICIENCY RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
HIGH EFFICIENCY RECTIFIER
VOLTAGE RANGE 50 - 1000 Volts CURRENT 2.0 Amperes
UF2001PT
THRU
UF2007PT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Low power loss, high efficiency
* Low leakage
* Low forward voltage drop
* High current capability
* High surge capability
* High speed switching
* High reliability
MECHANICAL DATA
Case: JEDEC DO-15 molded plastic
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.38 gram
DO-15
1.0(25.4)
MIN.
0.034(0.9)
0.028(0.7) ^DIA.
0.300(7.6)
0.230(5.8)
1.0(25.4)
MIN.
0.140(3.6)
0.104(2.6) ^DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DO-15
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
0.375" (9.5mm) Lead Length TA = 55^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note 1)
Maximum Thermal Resistance (Note 2)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
UF2001P TUF2002PT UF2003PT UF2004PT UF2005PT UF2006PT UF2007PT UNITS
50
100 200 400 600 800 1000 Volts
35
70
140 280 420 560 700 Volts
50
100
200
400
600
800 1000 Volts
2.0
Amps
IFSM
CJ
R JL
R JA
TJ, TSTG
60
30
12
40
-55 to +150
Amps
17
pF
o_{C / W}
o_{C / W}
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 2.0 A DC
SYMBOL
VF
UF2001P T UF2002PT UF2003PT UF2004PT UF2005PT UF2006PT UF2007PT UNITS
1.0
1.3
1.7
Volts
Maximum DC Reverse Current
at Rated DC Blocking Voltage
TA = 25^oC
IR
TA = 125^oC
10
uAmps
50
uAmps
Maximum Reverse Recovery Time (Note 3)
trr
50
75
nSec
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts
2. Thermal Resistance from Junction to Ambient, and from junction to lead length 0.375" (9.5mm) P.C.B. mounted.
3. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A
2001-6