English
Language : 

U16U10PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – SUPER FAST RECOVERY RECTIFIER
CHENMKO ENTERPRISE CO.,LTD
SUPER FAST RECOVERY RECTIFIER
VOLTAGE RANGE 100 - 400 Volts CURRENT 16 Amperes
U16U10PT
THRU
U16U40PT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Dual rectifier construction, positive centertap
* Glass passivated chip junctions
* Low power loss
* Low forward voltage, high current capability
* High surge current capability
* Superfast recovery times for high efficiency
* High temperature soldering guaranteed :
260oC/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC D2PAK molded plastic
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Weight: 0.08 ounces, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
D2PAK
0.420(10.67)
0.380(9.69)
0.245(6.22)
MIN.
K
1K2
0.190(4.83)
0.160(4.06)
0.055(1.40)
0.045(1.14)
0.055(1.40)
0.047(1.19)
0.100(2.54)
0.095(2.41)
PIN 1
PIN 2
0.110(2.79)
0.090(2.29)
0.037(0.940)
0.027(0.686)
0.025(0.64)
0.018(0.46)
0.110(2.79)
0.080(2.03)
K - HEATSINK
Dimensions in inches and (millimeters)
D2PAK
MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction capacitance per leg ( NOTE 1 )
Typical thermal resistance ( NOTE 2 )
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
CJ
R JC
TJ, TSTG
U16U10PT
100
70
100
U16U20PT
200
140
200
U16U30PT
300
210
300
16.0
U16U40PT
400
280
400
UNITS
Volts
Volts
Volts
Amps
200
Amps
85
2.2
-55 to +150
pF
oC / W
oC
ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 8.0 A DC
VF
Maximum DC reverse current
at rated DC blocking voltage per leg
TC = 25oC
TC = 100oC
IR
Maximum reverse recovery time ( NOTE 3 ) per leg
trr
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
2. Thermal resistance from junction to case per leg mounted on heatsink
3. Reverse recovery test conditions : IF = 0.5 A, Ir = -1.0 A, Irr = -0.25 A.
U16U10PT U16U20PT U16U30PT U16U40PT
0.975
1.30
5.0
150
35
50
UNITS
Volts
uAmps
nS
2002-5