U16P20PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – SUPER FAST RECOVERY RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
SUPER FAST RECOVERY RECTIFIER
VOLTAGE RANGE 200 - 400 Volts CURRENT 16 Amperes
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Dual rectifier construction, positive centertap
* Glass passivated chip junctions
* Low power loss
* Low forward voltage, high current capability
* High surge current capability
* Superfast recovery times for high efficiency
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
U16P20PT
THRU
U16P40PT
DPAK
.094 (2.40)
.086 (2.20)
.022 (0.55)
.017 (0.45)
MECHANICAL DATA
Case: JEDEC DPAK molded plastic
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Weight: 1.7 grams ( Approximately )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction capacitance per leg ( NOTE 1 )
Typical thermal resistance ( NOTE 2 )
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
CJ
R JC
TJ, TSTG
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 8.0 A DC
VF
Maximum DC reverse current
at rated DC blocking voltage per leg
TC = 25^oC
TC = 100^oC
IR
Maximum reverse recovery time ( NOTE 3 ) per leg
trr
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
2. Thermal resistance from junction to case per leg mounted on heatsink
3. Reverse recovery test conditions : IF = 0.5 A, Ir = -1.0 A, Irr = -0.25 A.
.181 (4.60)
.263 (6.70)
.248 (6.30)
PIN 1
.027 (0.70)
.019 (0.50)
.035 (0.90)
.023 (0.60)
PIN 2
.015 (0.381)
K - HEATSINK
Dimensions in inches and (millimeters)
DPAK
U16P20PT
200
140
200
U16P20PT
0.975
U16P30PT
300
210
300
16.0
200
85
2.2
-55 to +150
U16P40PT
400
280
400
UNITS
Volts
Volts
Volts
Amps
Amps
pF
o_{C / W}
o_C
U16P30PT
U16P40PT
1.30
5.0
150
35
UNITS
Volts
uAmps
nS
2002-5