SSM5817SLPT Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 - 40 Volts CURRENT 0.5 Ampere

CHENMKO ENTERPRISE CO.,LTD
SURFACE MOUNT
SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 - 40 Volts CURRENT 0.5 Ampere
SSM5817SLPT
THRU
SSM5819SLPT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* For surface mounted applications
* Low profile package
* Built-in strain relief
* Metal silicon junction, majority carrier conduction
* Low power loss, high efficiency
* High current capability, low forward voltage drop
* Power dissipation: 410mW
* For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC SOD-123 molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Weight: 0.001 ounce 0.032 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
SOD-123
0.028(0.70)
0.018(0.45)
0.153(3.90)
0.140(3.55)
0.112(2.85)
0.098(2.50)
1
2
0.071(1.80)
0.055(1.40)
MAX.
0.008(0.2)
0.02(0.5)
Tpy
0.004(0.12)
Dimensions in inches and (millimeters)
SOD-123
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
SYMBOL
VRRM
Maximum RMS Voltage
VRMS
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current at TL = 100^oC
IO
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
Typic Junction Capacitance (Note 2)
CJ
Typical Thermal Resistance (Note 1)
R JL
Storage and Operating Temperature Range
TJ, TSTG
Voltage Rate of Change (Note 3)
di/dt
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
Maximum Instantaneous Forward Voltage
at IF=0.5A
Maximum Average Reverse Current
at Ratied DC Blocking Voltage
@ TA = 25^oC
@ TA = 100^oC
@ TA = 25^oC
@ TA = 100^oC
SYMBOL
VF
IR
SSM5817SLPT
20
14
20
SSM5817SLPT
0.385
0.330
250
13
SSM5818SLPT
30
21
30
0.5
5.5
170
240
-65 to +125
1000
SSM5818SLPT
0.430
0.380
130
11
NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.06 X 0.06" ( 0.15X 0.15mm ) copper pad area.
2. Measured at 1.0 MHZ and applied reverse voltage of 0 volt.
3. dv/dt measured at rated reverse voltage.
SSM5819SLPT
40
28
40
UNITS
Volts
Volts
Volts
Amps
Amps
pF
o_{C / W}
o_C
V/uSec
SSM5819SLPT
0.510
0.460
20
8
UNITS
Volts
Volts
uAmps
mAmps
2002-5