SSM24ALPT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – SCHOTTKY BARRIER RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
SURFACE MOUNT
SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 40 Volts CURRENT 2.0 Amperes
SSM24ALPT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* For surface mounted applications
* Low leakage current
* Built-in strain relief
* Metal silicon junction, majority carrier conduction
* Low power loss, high efficiency
* High current capability, low forward voltage drop
* High surge capability
* For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC SMA-S molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
SMA-S
+ 0.2
2.6 _{- 0.2}
0.975
+
-
0.1
0.1
+ 0.02
1.08 _{- 0.02}
+ 0.2
1.4 _{- 0.2}
+ 0.2
3.5 _{- 0.2}
+ 0.02
0.5 _{- 0.02}
+ 0.02
0.2 _{- 0.02}
+ 0.2
4.5 _{- 0.2}
Dimensions in millimeters
SMA-S
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note 2)
Typical Thermal Resistance (Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
IO
IFSM
CJ
R JL
TJ,TSTG
SSM24ALPT
40
28
2.0
40
250
20
-65 to +125
UNITS
Volts
Volts
Amps
Amps
pF
o_{C / W}
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at I F =2A
VF
SSM24ALPT
0.37
@ TA = 25^oC
0.1
Maximum Average Reverse Current
IR
@ TA = 100^oC
10
NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.31 X 0.31" ( 8 X 8mm ) copper pad area.
2. Measured at 1.0 MHZ and applied reverse voltage of 10 volts.
UNITS
Volts
mAmps
mAmps
2005-10