SR4001PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – GLASS PASSIVATED SILICON RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
SURFACE MOUNT
GLASS PASSIVATED SILICON RECTIFIER
VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere
SR4001PT
THRU
SR4007PT
FEATURES
* Low leakage current
* Ideal for surface mounted applications
* Metallurgically bonded construction
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Glass passivated junction
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
MELF
(2)
MECHANICAL DATA
Case: JEDEC MELF molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
Weight: 0.116 gram
0.205(5.2)
0.190(4.8)
SOLDERABLE
ENDS
0.024(.60) ⁽¹⁾
0.018(.46)
0.105(2.7)
0.095(2.4)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MELF
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current TA = 75^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note 1)
Maximum Thermal Resistance
(Note 2)
(Note 3)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
SR4001PT SR4002PT SR4003PT SR4004PT SR4005PT SR4006PT SR4007PT UNITS
50
100 200 400 600 800 1000 Volts
35
70
140 280 420 560 700 Volts
50
100
200
400
600
800 1000 Volts
1.0
Amps
IFSM
CJ
R JL
R JA
TJ, TSTG
30
15
20
50
-65 to +175
Amps
pF
o_{C / W}
o_{C / W}
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL SR4001PT SR4002PT SR4003PT SR4004PT SR4005PT SR4006PT SR4007PT UNITS
Maximum Instantaneous Forward Voltage at 1.0 A DC
VF
1.0
Maximum Full Load Reverse Current,
Full cycle Average at TA = 75^oC
30
Maximum Average Reverse Current
@ TA = 25^oC
IR
5.0
at Rated DC Blocking Voltage
@ TA = 125^oC
50
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts
2. Thermal Resistance Junction to terminal, 6.0 mm² copper pads to each terminal
3. Thermal Resistance Junction to ambient, 6.0 mm² copper pads to each terminal
Volts
uAmps
uAmps
uAmps
2002-5