SMD22LLPT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – SCHOTTKY BARRIER RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
SURFACE MOUNT
SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 Volts CURRENT 2.0 Amperes
SMD22LLPT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* For surface mounted applications
* Low profile package
* Built-in strain relief
* Metal silicon junction, majority carrier conduction
* Low power loss, high efficiency
* High current capability, low forward voltage drop
* High surge capability
* For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
* Low VF Products
MECHANICAL DATA
Case: JEDEC SOD-123S molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Weight: 0.001 ounce 0.032 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
0.5~1.0
2.55~3.0
0.8~1.35
0.25(min)
3.5~3.95
Dimensions in millimeters
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note 2)
Typical Thermal Resistance (Note 1)
Operating Temperature Range
Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
CJ
R JL
TJ
TSTG
SMD22LLPT
20
14
20
2.0
50
210
20
-65 to +125
-65 to +150
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 2.0 A DC
VF
SMD22LLPT
0.27
Maximum Average Reverse Current
@ TA = 25^oC
0.5
IR
at Rated DC Blocking Voltage
@ TA = 100^oC
10
NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.2 X 0.2" ( 5 X 5mm ) copper pad area.
2. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts.
SOD-123S
1.4~1.95
0.25(max)
SOD-123S
UNITS
Volts
Volts
Volts
Amps
Amps
pF
o_{C / W}
o_C
o_C
UNITS
Volts
mAmps
mAmps
2001-6