SM4001SPT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – GLASS PASSIVATED SILICON RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
SURFACE MOUNT
GLASS PASSIVATED SILICON RECTIFIER
VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere
SM4001SPT
THRU
SM4007SPT
FEATURES
* Low leakage current
* Ideal for surface mounted applications
* Metallurgically bonded construction
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Glass passivated junction
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
SOD-123S
0.5~1.0
1.4~1.95
MECHANICAL DATA
Case: JEDEC SOD-123S molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
2.55~3.0
0.8~1.35
0.25(min)
3.5~3.95
Dimensions in millimeters
0.25(max)
SOD-123S
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current TL = 110^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note 1)
Maximum Thermal Resistance
(Note 2)
(Note 3)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
SM4001SPT SM4002SPTSM4003SPT SM4004SPTSM4005SPT SM4006SPT SM4007SPT UNITS
50
100 200 400 600 800 1000 Volts
35
70
140 280 420 560 700 Volts
50
100
200
400
600
800 1000 Volts
IO
1.0
Amps
IFSM
CJ
R JL
R JA
TJ, TSTG
30
15
20
50
-65 to +175
Amps
pF
o_{C / W}
o_{C / W}
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL SM4001SPT SM4002SPTSM4003SPT SM4004SPTSM4005SPT SM4006SPT SM4007SPT UNITS
Maximum Instantaneous Forward Voltage at 1.0 A DC
VF
1.0
Maximum Full Load Reverse Current,
Full cycle Average at TA = 75^oC
30
Maximum Average Reverse Current
@ TA = 25^oC
IR
5.0
at Rated DC Blocking Voltage
@ TA = 125^oC
50
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts
2. Thermal Resistance Junction to terminal, 6.0 mm² copper pads to each terminal
3. Thermal Resistance Junction to ambient, 6.0 mm² copper pads to each terminal
Volts
uAmps
uAmps
uAmps
2002-5