SLM5817PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – SCHOTTKY BARRIER RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
SURFACE MOUNT
SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 Volts CURRENT 1.0 Ampere
SLM5817PT
FEATURES
* Hermetically sealed glass SMD package
* For surface mounted applications
* Low profile package
* Built-in strain relief
* Metal silicon junction, majority carrier conduction
* Low power loss, high efficiency
* High current capability, low forward voltage drop
* For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC SOD-87 molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Weight: 0.0015 ounce 0.048 gram
SOD-87
3.7
SOLDERABLE
3.3
ENDS
0.3
2.1
2.0
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in millimeters
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
SYMBOL
VRRM
Maximum RMS Voltage
VRMS
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current at TL = 100^oC
IO
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
Typic Junction Capacitance (Note 2)
CJ
Typical Thermal Resistance (Note 1)
R JA
Storage and Operating Temperature Range
TJ, TSTG
Voltage Rate of Change (Note 3)
di/dt
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage
at TA = 25^oC
Maximum Average Reverse Current
at Ratied DC Blocking Voltage
@ IF=1.0A
VF
@ IF=3.0A
@ TA = 25^oC
IR
@ TJ = 100^oC
SLM5817PT
20
14
20
1.0
25
70
150
-65 to +125
1000
SLM5817PT
0.450
0.750
1
10
NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.06 X 0.06" ( 0.15X 0.15mm ) copper pad area.
2. Measured at 1.0 MHZ and applied reverse voltage of 0 volt.
3. dv/dt measured at rated reverse voltage.
SOD-87
UNITS
Volts
Volts
Volts
Amps
Amps
pF
o_{C / W}
o_C
V/uSec
UNITS
Volts
Volts
mAmps
mAmps
2002-04