SF11PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – SUPER FAST RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
GLASS PASSIVATED
SUPER FAST RECTIFIER
VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere
SF11PT
THRU
SF18PT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* High reliability
* Low leakage
* Low forward voltage
* High current capability
* Super fast switching speed
* High surge capability
* Good for switching mode circuit
MECHANICAL DATA
Case: JEDEC DO-41 molded plastic
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.33 gram
DO-41
1.0(25.4)
MIN.
0.034(0.9)
0.028(0.7) ^DIA.
0.205(5.2)
0.166(4.2)
1.0(25.4)
MIN.
0.107(2.7)
0.080(2.0) ^DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DO-41
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
SYMBOL
VRRM
VRMS
VDC
SF11PT SF12PT SF13PT SF14PT SF15PT SF16PT SF17PT SF18PT UNITS
50 100 200 300 400 600 800 1000 Volts
35 70 140 210 280 420 560 700 Volts
50 100 200 300 400 600 800 1000 Volts
Maximum Average Forward Current at TA = 55^oC
IO
1.0
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
IFSM
CJ
TJ, TSTG
30
15
-65 to +150
Amps
10
pF
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 1.0 A DC
VF
Maximum DC Reverse Current
at Rated DC Blocking Voltage
TA = 25^oC
IR
TA = 125^oC
Maximum Reverse Recovery Time (Note 2)
trr
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts
2. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A
SF11PT SF12PT SF13PT SF14PT SF15PT SF16PT SF17PT SF18PT UNITS
0.95
1.27
1.75
Volts
5.0
uAmps
50
uAmps
35
45
nSec
2001-6