S10C70PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – SCHOTTKY BARRIER RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 70 - 100 Volts CURRENT 10 Amperes
S10C70PT
THRU
S10C100PT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Metal Silicon junction, majority carrier conduction
* Low power loss,high efficiency
* High current capability, low forward voltage drop
* Guardring for overvoltage protection
* For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
* High temperature soldering in accordance with
CECC 802 / Reflow guaranteed
MECHANICAL DATA
Case: JEDEC TO-220 molded plastic
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Weight: 2.24 grams ( Approximately )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical thermal resistance per leg ( NOTE 1 )
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
R JC
Operating and Storage Temperature Range
TJ, TSTG
TO-220
.108
(2.75)
.413 (10.5)
.374 (9.5)
.153 (3.9)
.146 (3.7)
.270 (6.9)
.230 (5.8)
.187 (4.7)
.148 (3.8)
.053 (1.3)
.047 (1.2)
.610 (15.5)
.583 (14.8)
.051
(1.3)
.043 (1.1)
.035 (0.9)
.102 (2.6)
.091 (2.3)
.157
(4.0)
.583 (14.8)
.531 (13.5)
.028 (0.7)
.020 (0.5)
.126
(3.2)
Dimensions in inches and (millimeters)
TO-220
S10C70PT
70
49
70
S10C80PT
80
56
80
S10C90PT
90
63
90
S10C100PT
100
70
100
UNITS
Volts
Volts
Volts
10.0
Amps
125
Amps
3.0
-60 to +150
o_{C / W}
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 5.0 A DC
VF
S10C70PT S10C80PT
0.75
S10C90PT S10C100PT UNITS
0.85
Volts
Maximum instantaneous reverse current at
TC = 25^oC
IR
rated DC blocking voltage per leg ( NOTE 2 )
TC = 125^oC
5.0
mAmps
50
mAmps
NOTES : 1. Thermal resistance from junction to case per leg
2. Pulse test : 300 us pulse width, 1% duty cycle
3. Suffix " C " = Common Cathod, Suffix " A " = Common Anode, Suffix " D " = Double.
2001-6