MUR405PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – HIGH EFFICIENCY RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
HIGH EFFICIENCY RECTIFIER
VOLTAGE RANGE 50 - 600 Volts CURRENT 4.0 Amperes
MUR405PT
THRU
MUR460PT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Low power loss, high efficiency
* Low leakage
* High current capability
* High speed switching
* High current surge
* High reliability
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
Weight: 1.2 gram
DO-201AD
1.0(25.4)
MIN.
0.052(1.3)
0.048(1.2) ^DIA.
0.375(9.5)
0.335(8.5)
1.0(25.4)
MIN.
0.220(5.6)
0.197(5.0) ^DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DO-201AD
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
SYMBOL
VRRM
VRMS
VDC
MUR405PT MUR410PT MUR415PT MUR420PT MUR430PT MUR440PT MUR450PT MUR460PT UNITS
50 100 150 200 300 400 500 600 Volts
35 70 105 140 210 280 350 420 Volts
50 100 150 200 300 400 500 600 Volts
IO
4.0@TA=80^oC
4.0@TA=40^oC
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
125
70
Amps
Typical thermal resistance ( NOTE 1 )
R JC
50
o_{C / W}
Operating and Storage Temperature Range
TJ, TSTG
-65 to +175
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 4.0 A DC
Maximum DC Reverse Current
at Rated DC Blocking Voltage at TJ = 25^oC
Maximum Full Load Reverse Current Average,
Full Cycle 0.375" (9.5mm) lead length at TJ = 150^oC
Maximum Reverse Recovery Time (Note 2)
SYMBOL
VF
IR
trr
MUR405PT MUR410PT MUR415PT MUR420PT MUR430PT MUR440PT MUR450PT MUR460PT UNITS
0.90
1.25
Volts
5.0
10
uAmps
150
250
uAmps
25
50
nSec
NOTES : 1. Thermal Resistance from Junction to lead and from junction to ambient with 0.375" (9.5mm) lead length,
both leads attached to heatsink
2. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A
2001-6