HMB11PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
MINIATURE GLASS PASSIVATED
SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER
VOLTAGE RANGE 50 - 200 Volts CURRENT 0.5 Ampere
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Surge overload rating of 35 Amperes peak
* Glass passivated chip junction
* Ideal for printed circuit board
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
HMB11PT
THRU
HMB13PT
MD-S
MECHANICAL DATA
Case: JEDEC MD-S molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Polarity syHMBols marked on body
Weight: 0.008 ounces, 0.22 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC aHMBient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
0.195(4.95)
0.179(4.55)
0.205(5.21)
0.195(4.95)
0.062(1.57)
0.058(1.47)
0.029(0.74)
0.017(0.43)
0.105(2.67)
0.095(2.41)
0.038(0.96)
0.019(0.48)
0.058(1.47)
0.054(1.37)
0.117(2.97)
0.107(2.72)
0.008(0.20)
0.004(0.10)
0.114(2.90)
0.094(2.40)
0.106(2.70)
0.090(2.30)
0.0075(0.19)
0.0065(0.16)
Dimensions in inches and (millimeters)
MD-S
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current TA = 30^oC
On glass-epoxy P.C.B.(NOTE 1)
On aluminum substrate (NOTE 2)
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Reverse Recovery Time
SYHMBOL
VRRM
VRMS
VDC
IO
IFSM
TRR
HMB11PT
50
35
50
HMB12PT
100
70
100
0.5
30
50
HMB13PT
200
140
200
UNITS
Volts
Volts
Volts
Amps
Amps
nSec
Typical Junction Capacitance (Note 3)
Typical thermal resistance per leg
CJ
R JA
10
pF
85
o_{C / W}
Operating and Storage Temperature Range
TJ, TSTG
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYHMBOL
HMB11PT
-55 to +150
HMB12PT
o_C
HMB13PT
UNITS
Maximum Instantaneous Forward Voltage at 0.5 A DC
VF
1.1
Volts
Maximum DC reverse current at rated
DC blocking voltage per leg
@ TA = 25^oC
IR
@ TA = 100^oC
5.0
uAmps
200
uAmps
NOTES : 1. On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.27 X 1.27 mm) pads
2. On aluminum substrate P.C.B. with an area of 0.8 x 0.8 x 0.25" (20 x 20 x 6.4mm) mounted on 0.05 x 0.05" (1.27 x 1.27mm) solder pad
3. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts
2002-9