HBM11PT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – HIGH EFFICIENCY SILICON RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
SURFACE MOUNT GLASS PASSIVATED
HIGH EFFICIENCY SILICON RECTIFIER
VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere
HBM11PT
THRU
HBM18PT
FEATURES
* For surface mounted applications
* Low forward voltage, high current capability
* Low leakage current
* Metallurgically bonded construction
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Glass passivated junction
* High temperature soldering guaranteed :
260^oC/10 seconds at terminals
SMB
MECHANICAL DATA
Case: JEDEC SMB molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
Weight: 0.003 ounces, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
0.155 (3.94)
0.130 (3.30)
(1)
0.096 (2.44)
0.084 (2.13)
0.190 (4.75)
0.160 (4.06)
0.060 (1.52)
0.030 (0.76)
0.220 (5.59)
0.205 (5.21)
0.083 (2.11)
0.077 (1.96)
(2)
0.012 (0.305)
0.006 (0.152)
Dimensions in inches and (millimeters)
SMB
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current TL = 110^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
SYMBOL
VRRM
VRMS
VDC
HBM11PT HBM12PT HBM13PT HBM14PT HBM15PT HBM16PT HBM17PT HBM18PT UNITS
50 100 200 300 400 600 800 1000 Volts
35 70 140 210 280 420 560 700 Volts
50 100 200 300 400 600 800 1000 Volts
IO
1.0
Amps
IFSM
30
Amps
Typical Junction Capacitance (Note 1)
CJ
15
12
pF
Operating and Storage Temperature Range
TJ, TSTG
-65 to +150
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 1.0 A DC
Maximum DC Reverse Current
at Rated DC Blocking Voltage at TA = 25^oC
Maximum Full Load Reverse Current Average,
Full Cycle at TA = 55^oC
Maximum Reverse Recovery Time (Note 2)
SYMBOL
VF
IR
trr
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts
2. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A
HBM11PT HBM12PT HBM13PT HBM14PT HBM15PT HBM16PT HBM17PT HBM18PT UNITS
1.0
1.3
1.5
1.7
Volts
5.0
uAmps
100
50
uAmps
70
nSec
2002-5