FR101GPT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – FAST RECOVERY RECTIFIER

CHENMKO ENTERPRISE CO.,LTD
GLASS PASSIVATED
FAST RECOVERY RECTIFIER
VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.0 Ampere
FR101GPT
THRU
FR107GPT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* High reliability
* Low leakage
* Low forward voltage drop
* High current capability
* High surge capability
* Fast switching
* Glass passivated junction
MECHANICAL DATA
Case: JEDEC DO-41 molded plastic
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.35 gram
DO-41
1.0(25.4)
MIN.
0.034(0.9)
0.028(0.7) ^DIA.
0.205(5.2)
0.166(4.2)
1.0(25.4)
MIN.
0.107(2.7)
0.080(2.0) ^DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DO-41
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Current at TA = 55^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
SYMBOL
VRRM
VRMS
VDC
FR101GPT FR102GPT FR103GPT FR104GPT FR105GPT FR106GPT FR107GPT UNITS
50
100 200 400 600 800 1000 Volts
35
70
140 280 420 560 700 Volts
50
100 200
400 600 800 1000 Volts
IO
1.0
Amps
IFSM
30
Amps
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
CJ
TJ,STG
15
pF
-65 to +175
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 1.0 A DC
VF
Maximum DC Reverse Current
at Rated DC Blocking Voltage at TA = 25^oC
IR
Maximum Full Load Reverse Current Average,
Full Cycle 0.375" (9.5mm) lead length at TL = 55^oC
Maximum Reverse Recovery Time (Note 2)
trr
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts
2. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A
FR101GPT FR102GPT FR103GPT FR104GPT FR105GPT FR106GPT FR107GPT UNITS
1.3
Volts
5.0
uAmps
100
uAmps
150
250
500
nSec
2001-6