5KP Datasheet, PDF (1/4 Pages) Surge Components – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts

CHENMKO ENTERPRISE CO.,LTD
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 110 VOLTS
5000 WATTS PEAK POWER 8.0 WATTS STEADY STATE
5KP
SERIES
FEATURES
* Plastic package
* 5000W surge capability at 1ms
* Glass passivated chip junction in P-6 Package
* Excellent clamping capability
* Low Zener lmpedance
* Fast response time: typically less than 1.0ps
from 0 volts to BV min.
* Typical IR less than 1 uA above 10V
* High temperature soldering guaranteed:
300 degree C/10seconds/.375"(9.5mm) lead length/51
bs., (2.3k) tension
MECHANICAL DATA
Case: JEDEC P-6 molded plastic
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.007 ounce, 2.1 grams
P-6
1.0(25.4)
MIN.
0.052(1.3)
0.048(1.2) ^DIA.
0.360(9.1)
0.340(8.6)
1.0(25.4)
MIN.
0.360(9.1)
0.340(8.6) ^DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
P-6
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For Bidirectional use C or CA Suffix for types 5KP5.0 thru types 5KP110
Electrical characteristics apply in both directions.
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Peak Power Dissipation at TA = 25^oC, Tp = 1ms ( Note1 )
Steady State Power Dissipation at TL = 75^oC
Lead Lengths .375" (9.5mm)
Peak Forward Surge Current 8.3ms Single Half
Sine-Wave Superimposed on Rated Load ( Note 2 )
SYMBOL
PPK
PD
IFSM
Operating and Storage Temperature Range
TJ, TSTG
NOTES : 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25^oC per Fig. 2.
2. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
VALUE
Minimum 5000
8.0
400
-55 to +175
UNITS
Watts
Watts
Amps
o_C
2001-6