1N5221PT Datasheet, PDF (1/4 Pages) Chenmko Enterprise Co. Ltd. – SILICON PLANAR POWER ZENER DIODES VOLTAGE RANGE 2.4V TO 200V

CHENMKO ENTERPRISE CO.,LTD
AXIAL LEAD
SILICON PLANAR POWER ZENER DIODES
VOLTAGE RANGE 2.4V TO 200V
1N5221PT
THRU
1N5281PT
FEATURE
* High temperature soldering type.
* ESD rating of class 3(>16 kV) per human body model.
* Silicon planar zener diodes.
* Silcon-oxide passivated junction.
* Low temperature coefficient voltage
MECHANICAL
* Axial-lead hermetically sealed package.
* DO-35 Packaging.
* Cathode indicated by polarity band.
* Mounting position: Any.
* Weight: Approx. 0.13g.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
DO-35
1.02 (26.0)
MIN.
.022 (0.56)
DIA.
.018 (0.46)
.165 (4.2)
MAX.
1.02 (26.0)
MIN.
.079 (2.0)
DIA.
MAX.
Dimensions in inches and (millimeters)
DO-35
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Zener Current ( see Table "Characteristics" )
Max. Steady State Power Dissipation @TL=75^oC,Lead Length=3/8"
Max. Operating Temperature Range
Storage Temperature Range
SYMBOL
-
PD
TJ
TSTG
VALUE
-
500
+200
-65 to +200
UNITS
-
mW
o_C
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
MIN.
TYP.
MAX.
Thermal Resistance Junction to Ambient
R JA
-
-
300
Max. Instantaneous Forward Voltage at IF= 100mA
VF
-
-
1.10
NOTES : 1. The JEDEC type numbers listd have a standaerd tolerance on the normal zener voltage of +10%, Suffix A=+5%.
2. The zener impedance is derived from 1KHz AC voltage, which results when an AC current having an RMS value equal to 10%
of DC zener current (IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at two points to insure a sharp knee
on the breakdown curve to eliminate unstable units.
3. Valid provided that electrodes at distance of 10mm from case are kept ambient temperature.
4. Measured under thermal equilibrium and DC test conditions.
5. The rating listd in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave
or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration.
UNITS
o_C/W
Volts
2001-6