1N4942GPT Datasheet, PDF (1/2 Pages) Chenmko Enterprise Co. Ltd. – FAST RECOVERY RECTIFIER VOLTAGE RANGE 200 - 1000 Volts CURRENT 1.0 Ampere

CHENMKO ENTERPRISE CO.,LTD
GLASS PASSIVATED
FAST RECOVERY RECTIFIER
VOLTAGE RANGE 200 - 1000 Volts CURRENT 1.0 Ampere
1N4942GPT
THRU
1N4948GPT
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* High switching capability
* Low leakage
* Low forward voltage drop
* High current capability
* Glass passivated junction
* High surge current capability
DO-41
MECHANICAL DATA
Case: JEDEC DO-41 molded plastic
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.35 gram
1.0(25.4)
MIN.
0.034(0.9)
0.028(0.7) ^DIA.
0.205(5.2)
0.166(4.2)
1.0(25.4)
MIN.
0.107(2.7)
0.080(2.0) ^DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DO-41
MAXIMUM RATINGES ( At TA = 25^oC unless otherwise noted )
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Current at TA = 55^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
SYMBOL
VRRM
VRMS
VDC
1N4942GPT 1N4944GPT 1N4946GPT 1N4947GPT 1N4948GPT UNITS
200
400
600
800
1000
Volts
140
280
420
560
700
Volts
200
400
600
800
1000
Volts
IO
1.0
Amps
IFSM
30
Amps
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
CJ
TJ,STG
15
pF
-65 to +175
o_C
ELECTRICAL CHARACTERISTICS ( At TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 1.0 A DC
VF
Maximum DC Reverse Current
at Rated DC Blocking Voltage at TA = 25^oC
IR
Maximum Full Load Reverse Current Average,
Full Cycle 0.375" (9.5mm) lead length at TL = 55^oC
Maximum Reverse Recovery Time (Note 2)
trr
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts
2. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A
1N4942GPT 1N4944GPT 1N4946GPT 1N4947GPT 1N4948GPT UNITS
1.3
Volts
5.0
uAmps
100
uAmps
150
250
500
nSec
2001-6