UF3A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT ULTRAFAST RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 3.0 Amperes)

UF3A thru UF3K
SURFACE MOUNT ULTRAFAST
RECTIFIER
CHENG- YI
ELECTRONIC
VOLTAGE RANGE
-50 TO 800 VOLTS
CURRENT
-3.0 Amperes
SMC/DO-214AB
FEATURES
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Ultrafast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Glass passivated junction
High temperature soldering
260^oC/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AB molded plastic
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Indicated by cathode band
Standard Packaging: 16mm tape (EIA-481)
Weight: 0.007 ounces, 0.21 gram
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.079(2.00)
.103(2.62)
.030(0.76)
.050(1.27)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25⁰C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, reistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOLS UF3A
UF3B
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
Maximum RMS Voltage
VRMS
35
70
Maximum DC Blocking Voltage
VDC
50
100
Maximum Average Forward Rectified Current,
at TL=75⁰C
I(AV)
UF3D
200
140
200
UF3G
400
280
400
3.0
UF3J
600
420
600
UF3K
800
560
800
UNITS
V
V
V
A
Peak Forward Surge Current
8.3 ms single half sine-wave superimposed
IFSM
on rated load (JEDEC Method) ^TA=550C
100.0
Maximum Instantaneous Forward Voltage at 3.0A V_F
1.0
1.4
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@ ^TA=250C
@ ^TA=1000C
Maximum Reverse Recovery Time (Note 1) ^TJ=250C
Typical Junction Capacitance (Note 2)
Maximum Thermal Resistance (Note 3)
I_R
T_RR
C_J
R JL
50.0
75.0
10.0
300
15
Operating and Storage Temperature Range
T_J , TSTG
-50 to +150
Notes : 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHZ and Applied Vr=4.0 volts.
3. 8.0mm² (.013mm thick) land areas.
1.7
100.0
63
A
V
A
nS
pF
0_C/W
0_C